BLACK INDUCTION COOKTOP CI304PTX & CI365PTX models INSTALLATION GUIDE US CA
SAFETY AND WARNINGS ! WARNING! Electric Shock Hazard Failure to follow this advice may result in electric shock or death. • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance. • Connection to a good earth wiring system is essential and mandatory. • Alterations to the domestic wiring system must only be made by a qualified electrician.
INITIAL CONSIDERATIONS PRIOR TO INSTALLATION MULTIPLE PRODUCT INSTALLATION Before installation, please ensure the following: y y y The countertop is made of a heat resistant material. The power supply cable is not accessible through cupboard doors or drawers. There is adequate flow of cool air from the cabinetry to the base of the cooktop. You may ventilate from adjacent cupboards, but ensure that the available air supply will not be restricted.
COMPONENTS REQUIRED PARTS SUPPLIED Clamping brackets (4) and screws (4) 4 TOOLS REQUIRED Foam tape (1) Wrench Crosshead screwdriver Hex key Router Silicone Cutter
PRODUCT DIMENSIONS — 30" MODEL B PRODUCT DIMENSIONS C IN MM 3 13/16 97 B Overall width of cooktop 30 762 C Overall depth of cooktop 21 533 D Height of chassis 2 1/16 53 E Width of chassis 28 3/8 720 F Depth of chassis 19 482 9/16 14 H Depth of front overhang of cooktop glass 13/16 21 I Depth of rear overhang of cooktop glass 1 1/4 31 J Depth of side overhang of cooktop glass 13/16 21 A Overall height of cooktop* PLAN PLAN PLAN PLAN ISOMETRIC G Height of cooktop glass**
PRODUCT DIMENSIONS — 36" MODEL B PRODUCT DIMENSIONS C A PLAN PLAN ISOMETRIC G D J E FRONT FRONT FRONT FRONT Actual product dimensions may vary by ± 1/16" (2 mm) 6 J IN MM 3 3/8 86 B Overall width of cooktop 35 3/8 899 C Overall depth of cooktop 20 7/8 530 D Height of chassis 2 50 E Width of chassis 33 3/4 858 F Depth of chassis 19 1/16 484 G Height of cooktop glass** 1/4 6 H Depth of front overhang of cooktop glass 1/2 13 I Depth of rear overhang of cooktop glass 1 5/16
CUTOUT DIMENSIONS 30" MODEL 36" MODEL A A D D B B C C CUTOUT DIMENSIONS PLAN PLAN FRONT FRONT CI304PTX IN MM A Overall width of cutout 28 3/4 730 B Overall depth of cutout 19 5/16 C Corner radius of cutout D Offset overhang allowance CUTOUT DIMENSIONS CI365PTX IN MM A Overall width of cutout 34 1/4 870 490 B Overall depth of cutout 19 7/16 494 max 3/8 max 10 C Corner radius of cutout max 3/8 max 10 1 9/16 39 1 9/16 39 D Offset overhang allowance 7
CLEARANCE DIMENSIONS — 30" MODEL H Combustible surface F F A Any materials of a building structure or decorative structure made of wood, compressed paper, plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being ignited and burned. Such material shall be considered combustible even though flame-proofed, fire-retardant treated or surface-painted, or plastered.
CLEARANCE DIMENSIONS — 36" MODEL H Combustible surface F F A Any materials of a building structure or decorative structure made of wood, compressed paper, plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being ignited and burned. Such material shall be considered combustible even though flame-proofed, fire-retardant treated or surface-painted, or plastered.
VENTING CLEARANCES DRAWER OR OTHER OBSTRUCTION OVEN WITH COOLING FAN This cooktop requires adequate supply of cool air to fully function. The base of the cooktop must have direct unrestricted ventilation to the room where the cooktop is installed. There must be a 4mm air gap at the front of the cooktop.
PROUD INSTALLATION Turn the cooktop upside down on a protective cover. 1 Apply adhesive foam seal around the glass overhang, 3/16" (5mm) from the edge of the glass. 2 Ensure the adhesive side facing is down to form a continuous seal around the cooktop. 4 Gently lower the cooktop into the cutout ensuring you have access below the countertop to fit and secure the brackets. 5 Locate the side brackets* to the appropriate slots on the cooktop chassis.
Green Green Yellow & &Yellow wire wire ELECTRICAL CONNECTION The domestic wiring system is suitable for the power drawn by the cooktop. The voltage corresponds to the value given in the rating plate. The power supply cable sections can withstand the load specified on the rating plate. z z MODEL MAX. CURRENT DRAW CI304PTX MAX.
INSTALLER CHECKLIST Read all installation guidance in this document to see if the unit has been correctly installed. Ensure that installation has been completed correctly before use. TO BE COMPLETED BY THE INSTALLER Ensure that: Is the cooktop earthed? Check that all the cooking zones function correctly. Place suitable pans with water in them on each zone, then turn all of them on to a high setting.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
