User guide

25
Using your cooktop’s special features
When Auto Heat-reduce is set
To increase the lower heat setting while A is flashing, simply touch + .
If you would like a lower or higher heat setting than you originally selected, touch – and +
together and set the cooking zone for Auto Heat-reduce again. Alternatively, wait until A stops
flashing and then modify the heat setting.
To quit the Auto Heat-reduce setting while A is flashing
Touch the – and + controls of the corresponding
cooking zone together.
Note:
The Auto Heat-reduce and PowerBoost features cannot be used together. If you turn
PowerBoost on when Auto Heat-reduce is already set, the latter will be immediately
cancelled and PowerBoost will be activated instead.
Initially, while the cooking zone is
at the highest setting, A will flash
alternately with your selected lower
setting. The length of time at the
highest setting depends on the lower
heat setting selected. See chart below.
Then, when the period of highest setting
is over, A will stop flashing and the
cooking zone will automatically reduce
the heat to your pre-selected lower
setting.
Pre-selected lower heat setting Length of time at highest setting
1 40 seconds
2 1 minute
3 2 minutes
4 3 minutes
5 4 minutes
6 7 minutes
7 2 minutes
8 3 minutes