Data Sheet Induction Cooktop

0 100 200 400
millimetres
Model no:
CI604DTB3
Product Dimensions
mm
a Height of chassis (below top of bench including terminal block)
49
B Overall width of cooktop
600
c Overall depth of cooktop
530
D Height from benchtop datum to top of cooktop glass
5
e Width of chassis
549
f Depth of chassis
478
g Depth of front control panel
85
h Depth of cooktop cooking area
442
i Distance from side edges of cooktop to chassis
26
j Distance from front edge of cooktop to chassis
14
k Distance from back edge of cooktop to chassis
38
Minimum Clearances
mm
Minimum clearance from side edges of cutout to nearest
combustible surface
30
Minimum clearance from rear edge of cutout to nearest
combustible surface
30
Minimum clearance below top of benchtop to rear top of oven*
installed below cooktop or cabinetry
65
Minimum clearance from glass surface to rangehood
650
Minimum clearance from benchtop to overhead cabinet not
directly above the cooktop
450
Minimum ventilation gap between bottom of bench and top of
cabinetry fronts
4
*NOTE: The oven installed below the cooktop MUST have a cooling fan.
It is important that the induction cooktop receives adequate air supply.
For ventilation requirements please refer to the installation manual.
INDICATES CUTOUT -------------------------------------------------------
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
DATE: 20.10.2016
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
DATUM :
TOP OF BENCHTOP
600
B
e
530
C
h
g
D
A
f
CLEARANCE : COMBUSTIBLE SURFACE
FRONT VIEW
PLAN VIEW
PROFILE VIEW
CLEARANCE : OVEN OR CABINETRY
CLEARANCE : RANGEHOOD
i i j k
CLEARANCE : OVERHEAD CABINET NOT DIRECTLY ABOVE COOKTOP
POWER CORD
LOCATION
POWER CORD
LOCATION
DATA SHEET
600mm Induction Cooktop