INDUCTION COOKTOP CI302DTB, CI603DTB, CI604DTB, CI754DTB & CI905DTB models USER GUIDE NZ AU GB IE SG
CONTENTS Safety and warnings 2 Introduction 7 Choosing the right cookware 8 Using your induction cooktop 10 Using your cooktop’s special features 16 Cooking guidelines 29 Care and cleaning 32 Troubleshooting 33 Warranty and service 36 Energy guidelines (GB IE only) 38 IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time.
SAFETY AND WARNINGS Operation and maintenance ! WARNING! Electrical Shock Hazard Do not cook on a broken or cracked cooktop. If the cooktop surface should break or crack, switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician. Switch the cooktop off at the wall before cleaning or maintenance. Failure to follow this advice may result in electrical shock or death.
SAFETY AND WARNINGS Operation and maintenance ! WARNING! Health Hazard This appliance complies with electromagnetic safety standards. However, persons with cardiac pacemakers or other electrical implants (such as insulin pumps) must consult with their doctor or implant manufacturer before using this appliance to make sure that their implants will not be affected by the electromagnetic field. Failure to follow this advice may result in death.
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTIONS ● ● ● ● ● ● ● ● ● ● 4 Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite. Never use your appliance as a work or storage surface. Never leave any objects or utensils on the appliance. Do not place or leave any magnetisable objects (eg credit cards, memory cards) or electronic devices (eg computers, MP3 players) near the appliance, as they may be affected by its electromagnetic field.
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTIONS ● ● ● ● ● ● ● ● ● ● Children of less than 8 years old must be kept away from the appliance unless continuously supervised. This appliance can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and they understand the hazards involved.
6
INTRODUCTION Introducing your cooktop Congratulations on your new purchase. Your Fisher & Paykel induction cooktop is the ultimate in induction cooking, giving you the speed, precision, and simplicity of electronic control, and the easy-care elegance of a ceramic glass surface. For more information, visit our local website listed on the back cover. A word on induction cooking ● ● ● Induction cooking is a safe, advanced, efficient, and economical cooking technology.
CHOOSING THE RIGHT COOKWARE To check if cookware is suitable ● Carry out a magnet test: ● Move a magnet across the base of the pan. If the magnet is attracted then the pan is induction suitable. ● Note: Make sure attraction is consistent across the base of the pan. If there are gaps, such as an indented manufacturer’s logo, then the performance of the pan will be impaired. ● If you do not have a magnet: 1 2 3 Put some water in the pan you want to check. Follow the steps under ‘To start cooking’.
CHOOSING THE RIGHT COOKWARE Cookware guidelines ● Cookware made from the following materials is suitable: ● stainless steel with a magnetic base or core ● aluminium and copper with a magnetic base or core ● cast iron ● steel or enamelled steel. ● Cookware made from the following materials is not suitable: ● pure stainless steel ● aluminium or copper without a magnetic base ● glass ● wood ● porcelain ● ceramic or earthenware. Do not use cookware with jagged edges or a curved base.
USING YOUR INDUCTION COOKTOP 5 1 5 5 5 5 5 4 1 5 5 CI302DTB model CI603DTB model 1 CI604DTB model 2 3 2 CI754DTB model 2 1 4 CI905DTB2 model 5 5 CI905DTB3 model COOKING ZONE ZONE DIAMETER POWER POWERBOOST RECOMMENDED MINIMUM PAN SIZE 1 145 mm 1400 W 2200 W * 120 mm 2 180 mm 1850 W 3000 W * 145 mm 3 210 mm 2300 W 3700 W * 145 mm 4 180/260 mm 1850/2600 W 3000/5500 W * 125 mm (inner zone) 250mm (dual zone) 5 SmartZone 2100 W 3700 W ** 120mm (un-bridged) 250m
USING YOUR INDUCTION COOKTOP Control panel Zone timer indicator GentleHeat indicators if one is lit: gentle heat is activated GentleHeat control Heat Setting Display if brightly lit: timer is selected and ready to be set Cooking Bridging if dimly lit: Zone Timer Zone timer is identifier indicator counting down Display Setting selector: Touch this area or slide your finger along it to select the heat setting.
USING YOUR INDUCTION COOKTOP To start cooking 0 will appear in the cooking zone displays. 1 Touch and hold the ON/OFF control for 2 seconds. A white indicator light will glow. 2 3 Place a suitable pan on the cooking zone you wish to use. ● Make sure the bottom of the pan and the surface of the cooking zone are clean and dry. 4 Select a heat setting by touching or sliding the setting selector with your finger.
USING YOUR INDUCTION COOKTOP If a display flashes ● ● ● alternately with the heat setting This means that: you have not placed a pan on the correct cooking zone or the pan you’re using is not suitable for induction cooking or the pan is too small or not properly centred on the cooking zone. No heating takes place unless there is a suitable pan on the cooking zone. The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.
USING YOUR INDUCTION COOKTOP When you have finished cooking 1 Turn the cooking zone off by touching or sliding down to 0. Make sure the display shows 0. 1 Turn the whole cooktop off by touching the ON/OFF control. 2 Beware of hot surfaces H will flash in the window of any cooking zone that is too hot to touch. It will remain on and steadily lit even when the cooktop is turned off. It will disappear when the surface has cooled down to a safe temperature.
USING YOUR INDUCTION COOKTOP Locking the controls ● ● You can lock the controls to prevent unintended use (for example children accidentally turning cooking zones on). When the controls are locked, all controls except the ON/OFF control are disabled. To lock the controls 1 Make sure that the cooktop is turned on but no cooking zone is in use. for 5 seconds. The white indicator light above 2 Touch and hold the keylock control the control comes on, indicating that the controls are locked.
USING YOUR COOKTOP’S SPECIAL FEATURES Using the PowerBoost feature This feature allows you to sear meat or bring liquid to the boil very quickly. When a cooking zone is set for PowerBoost, it uses more than 100% of the power of that particular cooking zone, resulting in a boost of intense heat. IMPORTANT! PowerBoost heats food and liquids very quickly. Do not leave the cooktop unattended when using this feature.
USING YOUR COOKTOP’S SPECIAL FEATURES ● Note: You can set two (CI603DTB, CI604DTB and CI754DTB) or three (CI905DTB2) cooking zones for PowerBoost, as long as one is not behind the other.
USING YOUR COOKTOP’S SPECIAL FEATURES Using the GentleHeat feature ● ● There are two Gentle heat settings. The Low setting is ideal for the most delicate cooking tasks (such as melting chocolate), as the cooking zone will provide a very low continuous gentle heat. The Medium setting is ideal for keeping cooked food warm and gently warming delicate foods. To set a cooking zone for GentleHeat 1AWith the cooktop turned on, touch the GentleHeat control.
USING YOUR COOKTOP’S SPECIAL FEATURES Using the Auto Rapid Heat feature This feature lets you rapidly heat up food or liquid then automatically reduce the temperature to a pre-selected heat setting. To set a cooking zone for Auto Rapid Heat 1 With the cooktop turned on, touch or slide the setting selector to the heat setting you want the cooking zone to reduce to. Do not lift your finger.
USING YOUR COOKTOP’S SPECIAL FEATURES When Auto Rapid Heat is set While the cooking zone is rapidly heating, A will flash alternately with the heat setting you have selected. ● ● When the rapid heating is finished, A will stop flashing and the temperature will automatically reduce to the heat setting you have selected. The amount of time the cooking zone will rapidly heat for depends on the heat setting you have selected. See below chart for rapid heat times.
USING YOUR COOKTOP’S SPECIAL FEATURES Using the timer You may use the timer in two different ways: ● ● ● ● You can use it as a minute minder, even when not using the cooktop. When used as a minute minder, the timer will not turn any cooking zone off when the set time is up. You can set it to turn one or more cooking zones off after the set time is up. You can set the timer for up to 1 hour and 59 minutes. The time will be displayed in hours and minutes when the timer is set for longer than 10 minutes.
USING YOUR COOKTOP’S SPECIAL FEATURES Using the cooking zone after you have a set the minute minder If you start using a cooking zone after you have set the minute minder, the minute minder will continue to count down. You may also set cooking timer to turn a zone off (see opposite). Setting the minute minder when you are using one or more cooking zones. .
USING YOUR COOKTOP’S SPECIAL FEATURES Setting the timer to turn one or more cooking zones off . 1 Make sure the cooking zone(s) you want to set the timer for are in use. 2 Tap the – and + controls of the timer together until the indicator of the desired cooking zone comes on. ● Note: only indicators of cooking zones in use will show as you scroll through. 3 Set the time. You may now continue to set the timer for additional cooking zones: .
USING YOUR COOKTOP’S SPECIAL FEATURES 5 Set the time. You can set different times for each of the cooking zones. Setting the minute minder when other timers are set 1 Repeatedly tap the – and + controls of the timer together as you cycle through the individual timers for the cooking zones until the egg timer glows. 0.00 will steadily show in the minute display. 2 Touch the – and + controls to set the timer. It will then countdown.
USING YOUR COOKTOP’S SPECIAL FEATURES To change or cancel a timer setting 1 With the cooktop turned on, repeatedly tap the – and + timer controls together until the indicator light in the desired cooking zone window glows brightly. 2 To change: Set the new time. OR 2 To cancel: Touch the – control of the timer and hold until the minute display shows 0. IMPORTANT! Scrolling down the time to turn off the cooking zone.
USING YOUR COOKTOP’S SPECIAL FEATURES Using Bridging Zones (CI905DTB3, CI604DTB & CI302DTB models only) ● ● ● The bridging zone function allows you to use two SmartZones together giving you a larger cooking area. Your pan(s) will need to cover both cooking zones. There may be a cooler area in the centre of the cooktop between the cooking zones. You may need to move food around the pan to ensure even cooking. When using bridging zones it is not possible to use the PowerBoost function.
USING YOUR COOKTOP’S SPECIAL FEATURES 3 Use the left hand setting selector to set the heat setting for the combined zone. The heat setting will be displayed in the left hand cooking zone control window only, but the setting indicator lights will glow on both cooking zones. The right hand selector will show . If no pan is detected If no pan is detected on the bridged cooking zone the left hand zone display will alternate between the selected setting and . The right hand selector will show .
USING YOUR COOKTOP’S SPECIAL FEATURES ● ● ● If no pan is detected on one half of the bridged cooking zone: Initially the left hand display will still show the selected temperature and the right hand display will still show . If after 10 minutes there is still no pan detected: the bridging function will switch off. the cooking zone without a detectable pan will turn off. the remaining cooking zone will continue cooking at the selected heat setting.
COOKING GUIDELINES IMPORTANT! Take care when frying: oil and fat heat up very quickly, particularly if you’re using PowerBoost. At extremely high termperatures oil and fat will ignite spontaneously and this presents a serious fire risk. Cooking tips ● ● ● ● ● ● 1 2 3 4 5 ● 1 2 3 4 5 6 7 When food comes to the boil, reduce the temperature setting. Using a lid will reduce cooking times and save energy by retaining the heat. Minimise the amount of liquid or fat to reduce cooking times.
COOKING GUIDELINES Heat settings The settings below are guidelines only. The exact setting will depend on several factors, including your cookware and the amount you are cooking. Experiment with the cooktop to find the settings that best suit you.
COOKING GUIDELINES HEAT SETTING SUITABILITY u ● melting chocolate, butter, and foods that burn quickly ● delicate warming for small amounts of food ● gentle simmering slow warming 1 - 2 ● 3 - 4 ● ● ● 5 - 6 7 - 8 ● pancakes ● sautéing cooking pasta ● 9 ● ● ● P reheating rapid simmering cooking rice ● stir-frying searing bringing soup to the boil boiling water 31
CARE AND CLEANING WHAT? HOW? IMPORTANT! Everyday soiling on glass (fingerprints, marks, stains left by food or non-sugary spillovers on the glass) 1 Switch the power to the cooktop off at the wall. 2 Apply cooktop cleaner while the glass is still warm (but not hot!) 3 Rinse and wipe dry with a clean cloth or paper towel. 4 Switch the power to the cooktop back on at the wall.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO The cooktop cannot be turned on. No power. Make sure the cooktop is connected to the power supply and that it is switched on at the wall. Check whether there is a power outage in your home or area. If you’ve checked everything and the problem persists, call your Authorised Service Centre or Customer Care. The touch controls are unresponsive. The controls are locked. Unlock the controls. See section ‘Using your induction cooktop’ for instructions.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO Some pans make crackling or clicking noises. This may be caused by the construction of your cookware (layers of different metals vibrating differently). This is normal for induction cookware and does not indicate a fault. The cooktop makes a low humming noise when used on a high heat setting (especially PowerBoost). This is caused by the technology of induction cooking.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO Condensation is forming on surrounding walls, cabinetry or your overhead rangehood. This is a normal for induction cooking. Energy efficient technology means that no heat is lost to surrounding surfaces. This results in condensation forming on these cooler surfaces when steam is produced by cooking. This is normal for induction cooking and does not indicate a fault. To minimise condensation: ● Ensure adequate ventilation while cooking.
WARRANTY AND SERVICE Before you call for service or assistance ... Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: 1 Your product is correctly installed. 2 You are familiar with its normal operation. If after checking these points you still need assistance or parts, please refer to the Service & Warranty book for warranty details and your nearest Authorised Service Centre, Customer Care, or contact us through our website www.fisherpaykel.com.
WARRANTY AND SERVICE This cooktop has been designed and constructed in accordance with the following codes and specifications: ● ● ● ● ● ● In New Zealand and Australia: AS/NZS 60335-1:2011 General Requirements for Domestic electrical appliances AS/NZS 60335-2-6:2014 Particular Requirements for Domestic electrical cooking appliances AS/NZS CISPR 14.1.2013 Electromagnetic Compatibility Requirements.
ENERGY GUIDELINES (GB IE ONLY) MODEL NO. COOKING ZONES DIAMETER/ AREA COOKING ZONE ENERGY CONSUMPTION* (PER ZONE) ENERGY CONSUMPTION* (WHOLE COOKTOP) CI302DTB 2 20x25 cm per zone 195.6 Wh/kg 187.0 Wh/kg 191 Wh/kg CI603DTB 3 LF (15 cm) LR (15 cm) R (26 cm) LF 176.0 Wh/kg LR 175.7 Wh/kg R 184.0 Wh/kg 179 Wh/kg CI604DTB 4 20x25 cm per zone LF 187.5 Wh/kg LR 191.7 Wh/kg RF 195.6 Wh/kg RR 187.8 Wh/kg 191 Wh/kg CI754DTB 4 LF (21 cm) LR (15 cm) RF (18 cm) RR (18 cm) LF 170.3 Wh/kg LR 182.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2017. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available. NZ AU GB IE SG 590487F 08.
