Installation Guide

6
A
D
B
E
C
F
5 FLUSH MOUNTING INSTALLATION (NOT RECOMMENDED)
TOP
TOP
FRONT
REAR
SIDE
CI302DTB CI603DTB CI604DTB CI754DTB CI905DTB
PRODUCT AND CABINETRY DIMENSIONS mm mm mm mm mm
A
Overall height of product (including terminal block below top of chassis) 54 54 54 54 54
B
Overall width of product
300 600 600 750 900
C
Overall depth of product
530 530 530 530 530
D
Height of chassis (including terminal block below top of chassis)
49 49 49 49 49
E
Width of chassis
257 549 549 719 855
F
Depth of chassis
478 478 478 478 482
G
Overall width of routered recess
305 605 605 755 905
G
I
Width of cutout
265 560 560 725 870
H
Overall depth of routered recess
535 535 535 535 535
H
I
Depth of cutout
490 490 490 490 494
I
Corner radius of cutout
max. 10 max. 10 max. 10 max. 10 max. 10
J
Corner radius of routered recess
max. 2 max. 2 max. 2 max. 2 max. 2
K
Height of routered recess
55555
L
Minimum clearance below top of benchtop to:
rear top of oven* installed below cooktop or cabinetry
thermal protection barrier
70
70
70
70
70
70
70
70
70
70
Note: Electrical
connection is
made at the right rear
WARNING!
We do not recommend flush mounting and
sealing as servicing requires the cooktop to
be removed from the benchtop. The owner
carries all risk for flush mounting the cooktop.
The owner must ensure the cooktop has been
cut out from the benchtop before servicing
can be carried out. Fisher & Paykel will not be
liable for any costs associated with removing
or replacing a flush-mounted and/or sealed-in
product, nor for repairing any damage that
may be incurred by doing this.
!
G
G
K
L
HH
IJ