OV E R T HE R A N GE CO NV E C T I O N M ICROWAVE OVE N CMOH30SS INSTALLATION GUIDE US CA
CONTENTS Mounting space 4 Wall construction 4 Electrical grounding instructions 5 Hood exhaust duct 5 Tools recommended for installation 6 Installation hardware 6 Preparation of the oven 7 Ventilation system 7 Oven installation 9 Mounting oven to the wall 10 Mounting deflector 11 Check list for operation 11 EN 3
MOUNTING SPACE WALL CONSTRUCTION Please read all instructions thoroughly before installing the Over the Range Convection Microwave Oven. Two people are recommended to install this product. If a new electrical outlet is required, its installation should be completed by a qualified electrician before the microwave oven is installed. See ELECTRICAL GROUNDING INSTRUCTIONS page 5. This microwave oven requires a mounting space on a wall as shown in Figure 1.
ELECTRICAL GROUNDING INSTRUCTIONS This appliance must be grounded. This microwave oven is equipped with a cord having a grounding wire with a grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code and local codes and ordinances. In the event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape wire for the electric current.
TOOLS RECOMMENDED FOR INSTALLATION z Phillips screwdriver z Electric drill z Scissors z Pencil z Tape z Measure tape z 1 1⁄2" wood bit or metal hole cutter (if metal cabinet is used) z 1⁄2", 5⁄8" and 3⁄32" drill bits z Saw to cut exhaust opening (if needed) z Protective drop cloth for product and range—you may also use carton for protection INSTALLATION HARDWARE The INSTALLATION HARDWARE (items following: ITEM 1-8) packed with the oven should contain the NAME QUANTITY PART CODE 1 W
PREPARATION OF THE OVEN 1. Open the bottom of the carton, remove oven and all packing materials. 2. CHECK THE OVEN. Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surfaces, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact your dealer or Fisher & Paykel AUTHORIZED SERVICER. 3. Rest the microwave oven on its side as shown in Figure 6. 4.
VENTILATION SYSTEM Step 3 C. VERTICAL VENTILATION - OUTSIDE VENTILATION (A) Rotate 180˚ z (B) Rotate the Hood Fan Unit 180˚ so that the fan blade openings are facing the back of the oven. Note, you will need to lift the wire over the hood fan unit so the wire will clear. See Figure 9 (A). Replace Hood Fan Unit into the oven. Be careful not to pinch the wire and the Hood Fan Unit. See Figure 9 (B). Step 1 Fan Cover Bracket z Figure 12 Figure 9 Step 4 Step Put the wire back into the cavity.
OVEN INSTALLATION VENTILATION SYSTEM This oven cannot be properly installed without referring to the mounting instructions found on both templates. Step 5 Read and follow mounting information on both TOP CABINET TEMPLATE and WALL TEMPLATE. z Attach the Fan Cover Bracket to unit with the 4 screws removed in step 1 above. See Figure 15. The Hood Fan Unit is now rotated for vertical exhaust operation. Wire Box 6 Step 1 z Separate 4 Toggle Bolts Toggle Nuts.
MOUNTING OVEN TO THE WALL Two people are recommended to attach the Over the Range Microwave Oven to the Mounting Plate. Step 1 Step 4 Thread the power supply cord through the hole made in the bottom of the top cabinet. z Step 2 z Hang the oven on the lower edge of the mounting plate. Rotate the unit upward. See Figure 20. Take care that the power cord is able to clear the edge of the hole as the oven is rotated upward.
MOUNTING DEFLECTOR CHECKLIST FOR INSTALLATION 1. Make sure the unit has been installed according to all of the Installation Instructions and the Wall and Top Cabinet Templates. 2. Plug in the power cord. 3. Keep the use and care guide. z Secure the deflector with 3 Tapping screws 4 x 12 mm, packed in the Installation Hardware.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2021. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
