User Guide

21
TROUBLESHOOTING
EN
PROBLEM POSSIBLE CAUSES WHAT TO DO
COOKTOP BURNERS
There is a power failure
– can I still use the
cooktop burners?
Power outage in your area. The cooktop burners can
still be used. To light them:
1 Holding a lighted
match to the flame
spreader, push in on the
control knob and turn
counterclockwise to LITE.
2 When the flame is
burning all the way
around the burner, you
may adjust the heat.
IMPORTANT!
If the flame is blown out
during a power failure, turn
the knob immediately to
OFF, as the burner will not
automatically relight and
gas may escape.
The flames have
suddenly gone out.
A draft or a spill has
extinguished the flame.
No action required.
The burner will detect this
and automatically relight.
However, if there has been
a large spill, we recommend
turning the burners off and
cleaning the burners and
sump area. See ‘Care and
cleaning’ for instrucions.
There is a slight
‘extinction pop’ or
flash after I’ve turned
a cooktop burner off.
This is normal for LP gas
and requires no action.