Quick Start Guide

ManualsBrandsFisher & Paykel ManualsDishwashersFisher & Paykel ADA 24" Stainless Steel Double DishDrawer Dishwasher

Childlock

Childlock disables all the buttons and

locks the drawer closed, preventing

unauthorized use by children.

Single models

To activate: press and hold until

you hear a second tone. The keylock

indicator will come on.

To cancel: press and hold until you

hear another tone and the keylock

indicator stops flashing and goes out.

Double models

To activate: press and hold and

together until you hear a second

tone. The keylock indicator will

come on.

To cancel: press and hold and

together until you hear another

tone and the keylock indicator stops

flashing and goes out.

Wash program indicators

These show which program is

selected.

Drawer indicator (Double models only)

White: drawer is running and selected.

Dim: drawer is running but not selected.

Flashing: drawer is paused

Display

●

Time remaining (minutes)

●

Fault code numbers

(see ‘If there is a fault’ in User guide).

Wash stage indicators

(See ‘During and after the wash

cycle’).

Keylock/Childlock indicator

If lit: keylock or childlock is activated.

Delayed start indicator

If lit: delayed start is set.

Salt indicator

(Water softener models only)

If lit: salt reservoir is empty.

Keep this document handy for easy reference.

●

For detailed information on the features of your dishwasher, see your ‘User guide’.

●

Before using your dishwasher, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.

●

For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service &

warranty’ booklet.

continued >

YOUR MODEL

CONTROLS AND DISPLAY

Single models

DCA

Double models

To Delay start

1 Press and hold until appears

on the display, then release. You are

now in Delay start mode.

2 Press until the display shows the

number of hours you want to delay

the start of a wash by (1 to 12 hours).

●

Note: If you scroll past 12 hours

the dishwasher will exit Delay start

mode. To re-enter delay start follow

step 1 above.

●

The wash will start once the delay

time is over, provided the drawer is

closed.

DD24 models only

If the drawer is opened after delay

start has been set (for example if

you need to load more dishes), delay

start will be paused after the drawer

is closed.

To restart delay start:

Close the drawer.

●

Single models: will flash.

●

Double models: and will flash.

●

Press to resume.

Cancel wash/Cancel Delay start

Press to cancel a wash that has

already started or to cancel the

Delay start setting.

●

If there is any water in the drawer, it

will automatically drain before the

dishwasher turns off.

Keylock

Keylock disables all the buttons –

helpful when cleaning the

dishwasher.

Single models

To activate: press and hold until

you hear one tone. The keylock

indicator will come on.

To cancel: press and hold until

you hear another tone and the

keylock indicator stops flashing and

goes out.

Double models

To activate: press and hold and

together until you hear one tone.

The keylock indicator will come

on.

To cancel: press and hold and

together until you hear another

tone and the keylock indicator stops

flashing and goes out.

Off/On

Press to turn the dishdrawer

on or off.

●

Opening the drawer will automatically turn

the dishwasher on.

Drawer selector (Double models only)

Press to scroll between drawers.

Wash program selector

Press to scroll through wash program

options.

Start / Delay Start

Press to start the wash.

To pause: Press again. The wash stage

indicator and (Double models) will

flash.

●

Wait for the 3 short and one long tone before

opening the drawer. Forcing it open mid cycle

may cause damage or injury.

●

If the drawer is not restarted within 7 minutes

it will tone intermittently until it is restarted.

OPERATING INSTRUCTIONS—STARTING A WASH

Note: each drawer can

run independently of

the other drawer.

Double models

DD60DAW9

DD60DAX9

DD60DAHW9

DD60DAHB9

DD60DAHX9

DD24DAW9

DD24DAB9

DD24DAX9

Single models

DD60SAX9

DD60SAHX9

DD24SAW9

DD24SAB9

DD24SAX9

Discard scraps

Scrape large food particles

off (e.g. bones, fruit stones)

and remove any foreign

objects (e.g. toothpicks,

strings, paper).

Start wash or set Delay start

Ensure drawer is closed.

To start wash: Press

To set delay start: Press and hold

to enter delay start, then press and

hold again to increase the delay

start time.

Select wash

Power the dishwasher on

then select wash program .

Load dishes carefully

To help with wash

performance,

arrange dishes so they are

evenly spaced and not

nesting.

IMPORTANT!

Accommodates plates up

to a max height of 280mm

(11”) for standard tubs or

310mm (12 1/4”) for tall

tubs.

Add detergent

Fill the detergent dispenser (A) with

powdered detergent and close the

dispenser door.

IMPORTANT!

Do not place liquid detergent or

tablets in the detergent dispenser.

If using a tablet or gel pouch, place

it in the cutlery basket (B) or at the

edge of the base rack

(see user guide for details)

Check rinse aid

If the indicator on its plug (C) glows

bright red, refill the rinse aid

dispenser (D) with liquid rinse aid.

Make sure you then refit the rinse

aid plug back into its original

position, by rotating the plug back

into an upright position.

Rinse aid

Rotating Spray arm

Powdered

Detergent

Tablet or Gel Pouch

Controls Description

WASH PROGRAMS

Wash program indicators

These show which program is selected.

Double models interface shown

PROGRAM DESCRIPTION

Heavy Heavily soiled pots, pans and dishes.

Normal

(default setting)

Dishes that are quite heavily soiled or food soils that have

been left to dry overnight.

Normal Eco Normally soiled dishes for optimum water and energy

usage. The US/Canada Energy Guide is based on this cycle.

Fast Lightly soiled dishes.

Delicate Lightly soiled and heat sensitive crockery.

Rinse Prevents odours and soils from drying on dishes.

Check spray arm(s) are

mounted correctly and

can rotate fully around

Check the spray arm is

mounted correctly by

physically rotating it

around with your hand.

Before a wash, ensure there

are no items blocking the

spray arm(s) from rotating.

NZ AU US CA GB IE

DISHDRAWER

DISHWASHER

QUICK START GUIDE

Summary of content (2 pages)

PAGE 1
QUICK START GUIDE CONTROLS AND DISPLAY Single models DISHDRAWER TM DISHWASHER NZ AU US CA GB IE F H Keep this document handy for easy reference. ● ● ● I K For detailed information on the features of your dishwasher, see your ‘User guide’. Before using your dishwasher, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.
PAGE 2
PREFERENCE OPTIONS DURING AND AFTER THE WASH You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable settings before you start using your dishwasher. As the wash progresses, the display will count down the minutes remaining and show what stage the program is at. When the program has finished, the display will show 0 and the dishwasher will sound a tone. After 30 seconds the display will go out.