Installation Guide

15
!5 INSTALLING CUSTOM FRONT DRAWER PANELS
1
1
2
Electrical Shock Hazard
WARNING!
Before continuing, ensure that the product is
disconnected from the power supply.
Failure to follow this warning may result in
electrical shock, injury or fire.
3
1
1
!5-B REMOVE BOTH PANEL BRACKETS FROM PRODUCT
Remove side pins and gently pull off
the panel bracket slightly.
Repeat for the other drawer.
Remove the Knock-to-Pause module
from the back of the bracket.
Repeat for the other bracket.
Knock-to-Pause module
Side Pin
!5-B REMOVE THE KNOCK-TO-PAUSE MODULE
1 Disconnect the Earth Wire
from the bracket
2 Unplug the knock sensor
from the controller.
Repeat for the other drawer.