Installation Guide

10
9 MAXIMUM DISTANCE OF HOSES & CORD FROM CHASSIS EDGE
!0 TALL HEIGHT INTEGRATED MODELS FOR 18 7⁄8” (480MM) CAVITY ONLY - ATTACH CAVITY BRACKET
LEFT HAND SIDE
Drain hose - 78 1/2” (2000mm)
Drain hose - 70 1/2” (1800mm)
Inlet hose - 64 3/4” (1650mm)
Inlet hose - 49” (1250mm)
Power cord (excl.plug) - 29 1/2” (750mm)
Venting hose - 60 1/16” (1525mm) Venting hose - 75 13/16” (1925mm)
Power cord (excl.plug) - 27 1/2” (700mm)
RIGHT HAND SIDE
IMPORTANT!
The enclosed cavity bracket is fitted before installation in order
to conceal the gap at the top of the cavity left after installation.
Ensure the cavity panel bracket
is positioned so that the “F”
arrow is pointing towards the
front of the chassis.
Firmly push the bracket so that
the prongs engage with the top
tabs and it clicks into place.
Ensure the top trim
seal is facing forward
after attaching the
bracket.
IMPORTANT!
Ensure the prongs have not
been driven down into the
chassis as this will damage
the lid below.
1 2