Installation Guide

9
8 PREPARATION FOR EXTERNAL VENTING THROUGH SAME CABINET
ø 1 1/2”
(38 mm)
ø 1 1/2”
(38 mm)
ø max. 1 1/2”
(38 mm)
ø max. 1 1/2”
(38 mm)
ø 2 1/4”
(57 mm)
max. 3⁄16” (5 mm)
8 11⁄16”
(220 mm)
8 11⁄16”
(220 mm)
4” (100 mm)
4” (100 mm)
ø 2 1/4”
(57 mm)
Services can be located
either side of dishwasher
The ø 2 1⁄4” (57 mm) services hole
should be enlarged to accomodate
the extra venting hose by cutting out
some material from the bottom corner.
VENT HOSE
DRAIN HOSE +
INLET HOSE +
POWER CORD
POWER CORD
VENT HOSE + DRAIN
HOSE + INLET HOSE
Shelf cutouts
Shelf cutouts
min. 4”
(100 mm)
min. 4”
(100 mm)
IMPORTANT!
To prevent pooling of condensation
from the vent hose, a toekick height
of no less than 4” (100 mm) is required.
Services hole
O
If the hole is through wood, make sure
its edges are smooth and rounded.
O
If the hole is through metal, ensure
you fit the supplied Edge Protector to
prevent damage to the power cord.
8 PREPARATION FOR EXTERNAL VENTING THROUGH ADJACENT CABINET
External Venting Kit
IMPORTANT!
To prevent pooling of condensation
from the vent hose, a toekick height
of no less than 4” (100 mm) is required.
Services hole
O
If the hole is through wood, make sure
its edges are smooth and rounded.
O
If the hole is through metal, ensure
you fit the supplied Edge Protector to
prevent damage to the power cord.
max. 3⁄16” (5 mm)
ø 1 1/2”
(38 mm)