Installation Guide
Table Of Contents
- Safety and warnings
- Tools and components
- Product dimensions
- Custom panel dimensions
- Cabinetry
- Plumbing & electrical considerations
- Hard-wiring (optional)
- Preparation
- Push the product into the cavity
- Fit custom door panels
- Secure to cabinetry via brackets (method A)
- Secure to cabinetry via drawer removal (method B)
- Install pre-finished toe kick
- Install custom toe kick
- Plumbing & electrical connection
- Installer checklist
- Troubleshooting
17
INSTALL CUSTOM TOE KICK
1
2 5
3
4
Custom panel Template
Slide toe kick onto the mounting rails
and secure.
Do not over tighten the screws.
Re-align the custom panel to the
recessed panel and secure using the
provided screws.
Pre-drilling the screw bosses is
recommended for optimal results.
On a protected surface, carefully score
the toe kick at the marked height.
Align the custom panel to the recessed
pre-finished panel, referring to 'Custom
panel dimensions' for guidance.
Mark a section of the recessed panel to
be removed, ensuring it is shorter than
the custom panel.
Snap off excess toe kick material and
both end tabs.
Smooth the edges.
Custom panel Recessed
pre-finished
panel