DISHDRAWER™ DISHWASHER INTEGRATED DD24DTX6I, DD24DTX6HI DD24STX6I, DD24STX6HI USER GUIDE US CA
CONTENTS Safety and warnings 5 First use 8 Loading suggestions 10 Wash programs 11 Wash modifiers 13 Delayed start 15 Keylock 16 Detergent 17 Rinse aid 20 Water softener (some models only) 21 Preferences 23 WiFi connection & remote mode 25 Racking features 27 Maintenance 32 Maintenance alerts 36 Troubleshooting 37 Fault codes 40 Warranty and service 42 Registration To register your product visit our website: fisherpaykel.
SAFETY AND WARNINGS READ AND SAVE THIS GUIDE When using your DishDrawer™ Dishwasher, follow basic precautions, including the following: General z z z z z z z z z z z z z z z z z The information in this guide must be followed to minimise the risk of fire or explosion or to prevent property damage, personal injury or loss of life. Use the DishDrawer™ Dishwasher only for its intended function as described in this guide.
SAFETY AND WARNINGS z z z z z z z z z z z Always knock on the front of the drawer to pause and wait until you hear four beeps before opening the drawer. The DishDrawer™ Dishwasher must be used with the motor assembly, filter plate, filter, wire rack and spray arm in place. To identify what these parts are refer to 'Maintenance'. Take care not to load dishware items so they prevent the internal lid from properly sealing with the drawer.
SAFETY AND WARNINGS z z z z z z or otherwise subject to damage or stress. Do not install or store the DishDrawer™ Dishwasher where it will be exposed to temperatures below freezing or exposed to weather. Do not use an extension cord or a portable electrical outlet device (e.g. multi-socket outlet box) to connect the DishDrawer™ Dishwasher to the power supply. This appliance must be grounded.
FIRST USE z z z Ensure the installer has completed the ‘Final checklist’ in the Installation instructions. Read this guide, taking special note of the 'Safety and warnings' section. Remove all internal and external packaging and dispose of it responsibly. Recycle items that you can.
FIRST USE Dishware The combination of high temperatures and dishwasher detergent may cause damage to some items. Refer to the manufacturer's guidance or wash by hand if in doubt. Cutlery & silverware Glassware All cutlery and silverware should be rinsed immediately after use to prevent tarnishing, RINSE is recommended. Silver should not come into contact with stainless steel, mixing these can cause staining. Remove silver cutlery from the DishDrawer™ Dishwasher and hand dry immediately.
LOADING SUGGESTIONS When loading your drawer ensure items are placed so water coming from the rotating spray arm below can reach all areas. Wash performance will be reduced if it can't. Ensure z z z z z Spray arms can rotate freely. Glass and other fragile items are stable. All dish openings are facing downwards. Plates are evenly spaced. All sharp objects are located securely to avoid injury or damage to the product. Avoid z z z z 10 Overcrowding.
WASH PROGRAMS Your DishDrawer™ Dishwasher has a number of wash programs designed to suit your needs. Selecting the most appropriate cycle for each load will help ensure the best wash results. WASH PROGRAM PROGRAM DESCRIPTION AUTO Suitable for any type of load.
WASH PROGRAMS Pausing a wash program Knock on the door 2 times Cancelling a wash program with the door open Press and hold . If there is any water in the drawer, it will automatically drain before the DishDrawer™ Dishwasher turns off. z Holding for too long may activate DELAYED START. The delay start indicator will flash and a tone will sound to signal this. Refer to 'Cancelling Delayed Start' for details. Cancelling a wash program with the door closed Knock twice to pause the current cycle.
WASH MODIFIERS After setting a wash program, you can select one of the following additional options. Only one modifier can be set at a time. DRY+ QUIET SANITIZE Increases the final rinse temperature and the length of the drying phase. Lowers the motor speed to reduce noise, ideal for open plan living and night use. Raises the water temperature during the rinse phase to sanitize.
WASH MODIFIERS Using SANITIZE The SANITIZE wash modifier adjusts the wash program to meet the conditions required by Section 6, NSF 184 for sanitization to occur. While SANITIZE is running, the wash program is monitored to ensure that these conditions are met. Only programs utilising the SANITIZE wash modifier are certified to meet the conditions required by Section 6, NSF 184. Other wash programs may not reach the temperatures required for sanitization to occur.
DELAYED START Set the DishDrawer™ Dishwasher to start later in the day, and run the selected wash program. DELAYED START can be set after a wash program has been selected and can be set for up to 12 hours. Setting Delayed Start Press and hold , each tone indicates + 1 hour delay and can be set for up to 12 hours. z z If you scroll past 12 hours, the DishDrawer™ Dishwasher will exit DELAYED START. Countdown will begin when is released.
KEYLOCK The DishDrawer™ Dishwasher can be locked for cleaning and to prevent unintended use. When the control panel is locked the controls will remain unresponsive. To lock the drawer, refer to 'Preferences'. Lock DishDrawer™ Dishwasher 1 Open the drawer and press and hold until a tone sounds and the lock indicator begins flashing. Lock DishDrawer™ Dishwasher while washing 1 Select the desired wash program. 2 Press and hold until a tone sounds and the lock indicator begins flashing.
DETERGENT WARNING: Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children and infirm persons away from the dishwasher when it is open. Check the powdered detergent dispenser is empty after each wash.
DETERGENT Using solid tablets or pouches Using tablets could improve wash performance in hard water areas. Follow manufacturer guidance. Some tablets or pouches may not be suitable for all wash programs. Place in cutlery basket Place tablet or pouch in cutlery basket, ensuring it doesn't come in direct contact with dishes or cutlery. Place on tablet tray Place tablet or pouch on tablet tray in cutlery basket ensuring it doesn't come in direct contact with dishes or cutlery.
DETERGENT Powdered detergent quantity recommendations z z Use the table below to determine the optimal powdered detergent quantity for each wash program. If you have hard water in your area, more detergent may be required. Refer to 'Water hardness' for more details WASH PROGRAM DETERGENT QUANTITY PER DRAWER AUTO Full HEAVY Full MEDIUM Full LIGHT* Half full 60MIN Full GLASSWARE Full ECO Full RINSE n/a *tablets are not recommended for the LIGHT cycle.
RINSE AID Rinse aid provides a streak-free finish to glass and dishware as well as preventing metal from tarnishing. We recommend using a liquid rinse aid regularly for optimal drying results. During dispensing, several pulsing sounds may be heard. This is normal. rinse aid dispenser detergent bucket The rinse aid dispenser is located on the inside of the drawer next to the detergent dispenser. It holds approximately 80ml of rinse aid.
WATER SOFTENER (SOME MODELS ONLY) The salt reservoir must always be filled with granular salt designed for dishwasher water softening. We do not recommend the use of cooking salt like table salt, rock salt or pellets as they may contain impurities that will damage the water softener. Do not add detergent or rinse aid to the salt reservoir. This will cause damage. salt reservoir The salt reservoir is located on the inside of the drawer next to the detergent dispenser. It holds up to approximately 0.
WATER SOFTENER (SOME MODELS ONLY) Water hardness recommendations Use the table below to determine the optimal water hardness setting. Your local water company will be able to help. If you have a household water softener installed, use the setting recommended for water with a hardness under 100 ppm/6 gpg, irrespective of the water hardness in your area. If your water hardness is above 625 ppm/36 gpg, the wash performance of your DishDrawer™ Dishwasher will decline over time.
PREFERENCES You can adjust any of the settings of the below options prior to starting a wash cycle. WiFi Allows your DishDrawer™ Dishwasher to connect to your home network. Refer to 'WiFi connection & remote mode' for details. Auto power-on** Your DishDrawer is set to automatically power on for 30 seconds after a drawer is opened. This can be turned off. Rinse aid Controls the amount of rinse aid dispensed. Refer to 'Rinse aid' for details. Tones Adjusts tone settings.
PREFERENCES Changing the settings 1 Ensure there is no wash in progress, then open the drawer. Press and hold and together for four seconds. 2 to scroll through the settings. The Press wash modifier indicators will display which setting is selected. Refer to 'Settings displays' for details. 3 Press to change the setting within an option. The wash program indicators will display which setting is selected. Refer to 'Settings displays' for details. 4 Press to save the new setting and leave the menu.
WIFI CONNECTION & REMOTE MODE Your appliance can be connected to your home wireless network and operated remotely using the app. Getting started z z z z Ensure your home WiFi network is turned on. You will be given step by step guidance on both your appliance and mobile device. It may take up to 10 minutes to connect your appliance. For further guidance and troubleshooting, please refer to the app. On your mobile device: 1 Download the app from www.fisherpaykel.
WIFI CONNECTION AND REMOTE MODE Enabling remote mode 1 With your DishDrawer™ Dishwasher connected to your WiFi network, press and hold for four seconds. While is flashing, close the drawer to enable REMOTE MODE. 2 If the drawer is not closed within 4 seconds, while is flashing, REMOTE MODE will not be enabled. Disabling remote mode REMOTE MODE will automatically be disabled after 72 hours or if a fault occurs. Opening the drawer will also disable REMOTE MODE.
RACKING FEATURES Cutlery basket To reduce the risk of injury, we recommend loading knives and sharp utensils with handles facing up. Mix spoons, knives and forks within each section to stop cutlery nesting together and to ensure the water circulates freely. Keep stainless steel from touching silver cutlery to avoid staining.
RACKING FEATURES 3 4 2 1 5 5 Racking features 1 Folding tine rack 4 Trap door 2 Adjustable tine rack 5 Cup racks 3 Base rack Not illustrated: glass supports Base rack To remove 1 Fold the front cup racks up, and lift to their highest position. 2 Fold the rear cup racks up and lower to their lowest position. 3 While holding the wire cup rack supports inward so the top bar clears the side, carefully lift and tilt the rack out towards you.
RACKING FEATURES Adjustable tine rack This rack is designed to fit deep bowls or small plates by adjusting the spacing of the tines. To adjust spacing Slide the tines backward or forward by pushing or pulling the front handle. To remove Grip the front and back handles and pull up to unclip. To replace Align front and rear clips with the base rack and clip into place.
RACKING FEATURES Folding tine rack The folding tines can be removed if desired, however, it is recommended the tines are folded down rather than removed if more space required. To remove 1 Fold tines down towards each other. 2 Unclip the rack at each end by pulling firmly towards you. To replace 1 Line up the clips with the base rack. 2 Push firmly to click rack into place. Trap door The trap door provides quick access to the filter for efficient care and cleaning.
RACKING FEATURES Foldaway cup racks Each cup rack can be folded away independently to create more space within the drawer and are height adjustable. The cup racks on the left hand side have been designed to provide additional support for wine glasses via the wine grippers. To adjust height 1 Fold up to unlock the rack. 2 Adjust the height to suit by sliding up or down. 3 Fold back down to lock in the position.
MAINTENANCE Disconnect the DishDrawer™ Dishwasher from the power supply and allow it to cool before undertaking any cleaning or maintenance. 1 2 Tub features 3 1 Filter 2 Filter plate 3 Spray arm Cleaning surfaces Wipe with a damp cloth and dry using a lint-free cloth.
MAINTENANCE For ease of access to the filter, lift the trap door. Refer to 'Racking features' for details. Removing and cleaning the filter Twist the filter anti-clockwise until the arrow in the tub points to on the filter. Lift to remove. 1 filter cap Separate the filter cap from the filter base by pressing the release button and lifting. Do not attempt to remove the filter by force as this may cause damage. 2 filter base Clean under hot soapy water and rinse thoroughly.
MAINTENANCE Removing and cleaning the spray arm spray arm impeller With racking removed, lift the spray arm off the impeller, pulling up from the centre. Shake to dislodge any loose particles, rinse under running water and wipe with a damp cloth. Ensure the magnet is clean and clear and that water can flow through all holes. Refitting the spray arm Place the spray arm onto the impeller. Ensure that the arm rotates freely when refitted.
MAINTENANCE Winterizing (cold climates) If the DishDrawer™ Dishwasher is installed in a cold climate where temperatures fall below zero, we recommend winterizing. Turn off the water supply. 1 2 3 Disconnect the drain hoses from the sink drain pipe and the water inlet pipe from the water valve. Drain the water from the hoses, inlet pipe and water valve, using a bucket or pan to collect the water. Reconnect the water inlet pipe to the water valve and hoses to the sink drain pipe.
MAINTENANCE ALERTS Blocked spray arm If the spray arm rotation is obstructed, will flash and the current cycle will be paused. Resolving blocked spray arm alert 1 Ensure the spray arm can rotate freely and there are no protrusions below the rack. 2 Press to clear the warning and resume the wash program. 3 If the alert is not resolved within 1 hour, the cycle will resume but wash performance will continue to flash will be reduced. at the end of the cycle. Press to clear the warning.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO Unclean dishes Unsuitable wash program for load selected. Select the appropriate wash program for the load. Refer to 'Wash programs'. Drawer incorrectly loaded. Refer to 'Loading suggestions'. Filter plate or filter incorrectly installed. Refer to 'Removing and cleaning the filter'. Incorrect detergent use. Refer to 'Detergent' and follow the detergent manufacturer’s instructions. Excess food on dishware.
TROUBLESHOOTING 38 PROBLEM POSSIBLE CAUSES WHAT TO DO Water leaking Drain hose disconnected from waste pipe. Reconnect the drain hose to the waste pipe. Water inlet hose not connected correctly. Ensure the inlet hose is connected securely. Other leaks. Turn water and power supplies to the DishDrawer™ Dishwasher off. Call Customer Care or your Authorised Service Centre. Knocking on the door doesn't pause the wash cycle Knock to Pause sensor is incorrectly installed or calibrated.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO Fan noise after a wash program has finished This is normal. The fan continues to run to assist with drying. The fan will automatically stop after a set time, or when the drawer is opened. the fan may resume when drawer is closed again. Fan noise starts when I close the drawer, even though I didn’t start a new wash This is normal. In some cases, the fan will run when the drawer is closed for a set time after a program has finished.
FAULT CODES How do I know if there is a fault? Your DishDrawer™ Dishwasher will beep continuously and the indicators on the control panel will light up and flash. There are two types of fault codes – ‘F’ and ‘A’. If the wash modifier and lock indicators are flashing, it is a ‘F’ fault. If only the wash modifier indicators are flashing, it is an ‘A’ fault. With both F and A faults, one or more wash program indicators are also lit.
FAULT CODES ‘A’ fault codes Follow the steps below to try and fix the issue. DISPLAY POSSIBLE CAUSE WHAT TO DO A1: Water 1 Ensure the water supply is turned on. 2 Press once to stop the beeping, then again to clear the fault. 3 Press to resume the wash program. Supply fault. RINSE + all modifiers ECO, RINSE + all modifiers GLASSWARE, ECO + all modifiers GLASSWARE, ECO + RINSE + all modifiers Current wash program + SANITIZE A3: Drawer cannot drain.
WARRANTY AND SERVICE Before you call for service or assistance Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: 1 Your product is correctly installed. 2 You are familiar with its normal operation. If after checking these points you still need assistance or parts, please refer to the Service & Warranty book for warranty details and your nearest Authorized Service Centre, Customer Care, or contact us through our website www.fisherpaykel.com.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2021. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
