Installation Guide

8
7 MAXIMUM DISTANCE OF HOSES & CORD FROM CHASSIS EDGE
8 ATTACH CAVITY BRACKET (DD24SDFT MODELS ONLY)
LEFT HAND SIDE RIGHT HAND SIDE
IMPORTANT!
The enclosed cavity bracket is fitted before installation in order
to conceal the gap at the top of the cavity left after installation.
Ensure the cavity panel bracket
is positioned so that the “F”
arrow is pointing towards the
front of the chassis.
Firmly push the bracket so that
the prongs engage with the top
tabs and it clicks into place.
Ensure the top trim seal
is facing forward after
attaching the bracket.
IMPORTANT!
Ensure the prongs have not
been driven down into the
chassis as this will damage
the lid below.
1 2
Drain hose - 78 1/2” (2000 mm) Drain hose - 70 1/2” (1800 mm)
Inlet hose - 64 3/4” (1650 mm)
Inlet hose - 49” (1250 mm)
Power cord (excl.plug) - 78 1/2” (2000 mm)
Power cord (excl.plug) - 78 1/2” (2000 mm)