Installation Guide

RECOMMENDED METHOD (a) - SECURE WITHOUT DRAWER REMOVAL (FRAMELESS CABINETRY ONLY)

13a12a

ATTACH SIDE MOUNTING BRACKETS

INTEGRATED ONLY - ATTACH VENTING HOSE

Fitted Elbow

Clip all four side mounting

brackets into their slots

using a flat-bladed

screwdriver. Ensure they’re

securely fitted before

sliding product into cavity.

The mounting slots are in pairs,

one on each side diagonally

across the product. A bracket

must match A slot and B

bracket must match B slot.

Check that the fitted elbow is rotated

left or right (depending on the direction

of the routing), then ensure the venting

hose is securely attached to it.

NOW CHOOSE WHICH INSTALLATION METHOD (a) or (b)

IS MORE SUITABLE FOR YOUR CABINETRY...