Installation Guide
Table Of Contents
- Safety and warnings
- Tools and components
- Product dimensions
- Custom panel dimensions
- Cabinetry
- Clearances
- Plumbing & electrical considerations
- Hard wiring (optional)
- Cabinetry preparation
- External venting preparation
- Fit the trim bracket
- Prepare external venting
- Push the product into the cavity
- Secure the venting hose to cabinetry
- Fit the custom panel
- Secure to cabinetry via brackets (method A)
- Secure to cabinetry via drawer removal (method B)
- Installer checklist
- Troubleshooting
7
CUSTOM PANEL DIMENSIONS
CABINETRY DIMENSIONS
STANDARD INSTALL
ASSISTED OPENING
INSTALL**
INCHES MM INCHES MM
A Minimum panel height* 17 13/16 452 19 5/8 498
B Minimum panel width 23 7/16 596 23 7/16 596
C Panel depth 5/8 – 13/16 16 – 20 5/8 – 13/16 16 – 20
D Minimum clearance between base of door
panel and cabinetry
1/16 2 1/16 2
E Minimum clearance between top of door
panel and countertop
1/16 2 1/16 2
Maximum weight of each drawer panel (including handle)
19lb 9 kg
*Core panel dimension. Panel can be extended or lowered to suit installation
**for more information on panel placement refer to fisherpaykel.com
ISO PROFILE
Material specifications
z
Maximum weight of panel must not exceed 19lb (9kg) (including handle)
z
The panel should be adequately sealed to withstand moisture (122°F/50°C
@ 80% RH). The back and sides of the panel should be completely sealed
with a waterproof vapour barrier, such as polyurethane, to prevent damage.
z
The back of the panel should be completely flush so that the seal between
the panel and the rubber trim is maintained.
z
Installation outside these specifications may result in condensation on
cabinetry surfaces.
A
A
D
e
C
B
C
Standard installation illustrated