User Guide

39
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Knocking on the
door doesn't
pause the
wash cycle
Knock to Pause sensor
is incorrectly installed
or calibrated.
Contact Customer Care.
DishDrawer™
Dishwasher
is pausing
inadvertently
Knock to Pause sensor
is recognising taps and
bumps as knocks.
Knock to Pause sensor is incorrectly
installed or calibrated. Contact
Customer Care.
Drawer will
not open
(no tones or
wash in progress)
KEYLOCK is on. Turn KEYLOCK off. Refer to 'Keylock'.
Closed drawer auto lock
is on.
Press any button and open drawer within
30 seconds.
Integrated models: Knock once on the door
and open drawer within 30 seconds.
Power failure
during wash
program
Power outage in your
home or area.
Wait until power resumes, program will
restart in same part of wash program.
Flashing
wash modifier
indicators
A fault has occurred. Refer to 'Fault codes'.
Intermittent
beeping
DishDrawer™ Dishwasher
is paused.
Press
on the drawer door.
Integrated models:
Open the drawer and press
DishDrawer™
Dishwasher will
not start
Power supply is
not connected.
Connect the power supply.
The drawer is not
closed correctly.
Ensure the drawer is firmly closed.
KEYLOCK is on. Turn KEYLOCK off. Refer to 'Keylock'.
Cycle not started. Refer to 'Wash programs'.
Too much time passed
between pressing
and
closing the drawer.
Open the drawer and press
, close the
drawer within 4 seconds.
DishDrawer™ Dishwasher
is in Demo mode.
Contact Customer Care.
Fan noise after
a wash program
has finished
This is normal. The fan
continues to run to assist
with drying.
The fan will automatically stop after a
set time, or when the drawer is opened.
The fan may resume when drawer is
closed again.