User Manual

35
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE WHAT TO DO
Foaming Wrong type of detergent
used
ONLY use detergents for Dishwashers.
See ‘Adding detergent’.
Incorrect amount of
detergent.
See section ‘Wash programs and detergent
quantities’ or follow the detergent
manufacturer’s instructions.
Too much egg in the
wash load.
Increase the amount of detergent.
Rinse aid setting too
high.
Decrease the rinse aid setting.
Rinse aid dispenser plug
not closed properly.
Ensure that the rinse aid dispenser plug
is closed tight, with its hand grip pointing
vertically. See section ‘Using rinse aid’.
Water leaking Drain hose disconnected
from waste pipe.
Reconnect the drain hose to the waste
pipe.
Water inlet hose not
properly connected.
Ensure the inlet hose is connected
securely.
Other leaks. Turn water and power supplies to the
dishwasher off. Call Customer Care or
your Authorised Service Centre. See your
‘Service and warranty’ booklet for contact
details.
Rinse aid dispenser plug
not closed properly.
Ensure that the rinse aid dispenser plug
is closed tight, with its hand grip pointing
vertically. See section ‘Using rinse aid’.