Data Sheet Integrated Double DishDrawer

CUSTOM PANEL PREPARATION
600mm Double Integrated DishDrawer™
DATE: 28.05.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
Model no:
DD60DI9
DD60DHI9
Dimensions
mm
a Minimum height of top drawer panel*
398
B Width of top drawer and bottom drawer panels
596 - 615
C Minimum height of bottom drawer panel*
311 - 360
D Height from floor to top of bottom drawer panel**
414 - 474
E Ventilation gap between top drawer panel and bottom drawer
panel
8
F Height of toekick panel*
58 - 118
G Depth of custom panels
16 - 20
Maximum weight of each drawer panel (including handle)
9 kg
* The top drawer panel may be extended up, or the bottom panel down
from the fixed gap between both. Adjust the height of the toekick panel
accordingly.
** Depending on adjustment of leveling feet.
NOTE:
If the toekick depth is greater than 50mm, the panel will need to be cut to
clear the underside of the tub, please refer to the installation manual and panel
preparation downloads for more detail.
ISO VIEW PROFILE VIEW
B
a
g
C
f
E
D
E
A
C