Installation Guide

19
!6 FIT THE SUPPLIED PREFINISHED TOEKICK PANEL (IF PREFERRED)
1
2
3
4
19
19
5
6
8
9
7
IMPORTANT!
Do not overtighten screw.
Slide the toekick onto the
mounting rails either side
and screw the toekick
onto the bottom of tub
on either side.
Where the toekick
meets the bottom
of the tub is the
cut-off point
Mark this point
on the toekick
with a pencil
Lay the toekick face down on
a chopping board or similiar.
Score along with a knife Gently snap off the excess Snap off the two end tabs
Turn the toekick over and
score along the same line.
Smooth the edge with a file.
Be careful of sharp edges.
Prefinished Toekick Panel
1
2
3
5
7
8
6
4
9