Installation Guide

9
7 PREPARATION FOR EXTERNAL VENTING THROUGH SAME CABINET
ø 57mm
ø 57mm
ø 57mm
ø 38mm
ø 57mm
max. 5mm
220mm
220mm
100mm
100mm
ø 57mm
Services can be located
either side of dishwasher
The ø 57mm services hole should be
enlarged to accomodate the extra
venting hose by cutting out some
material from the bottom corner.
VENT HOSE
DRAIN HOSE +
INLET HOSE +
POWER CORD
POWER CORD
VENT HOSE + DRAIN
HOSE + INLET HOSE
Shelf cutouts
Shelf cutouts
min. 100mm
min. 100mm
IMPORTANT!
To prevent pooling of condensation
from the vent hose, a toekick height
of no less than 100mm is required.
Services hole
O
If the hole is through wood, make sure
its edges are smooth and rounded.
O
If the hole is through metal, ensure
you fit the supplied Edge Protector to
prevent damage to the power cord.
8 PREPARATION FOR EXTERNAL VENTING THROUGH ADJACENT CABINET
External Venting Kit
IMPORTANT!
To prevent pooling of condensation
from the vent hose, a toekick height
of no less than 100mm is required.
Services hole
O
If the hole is through wood, make sure
its edges are smooth and rounded.
O
If the hole is through metal, ensure
you fit the supplied Edge Protector to
prevent damage to the power cord.
max. 5mm
ø 57mm
(Excludes DD60SLI9 models)