User Guide

37
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Unclean dishes Unsuitable wash program
for load selected.
Select the appropriate wash program for
the load. Refer to 'Wash programs'.
Drawer incorrectly loaded. Refer to 'Loading suggestions'.
Filter plate or filter
incorrectly installed.
Refer to 'Removing and cleaning
the filter'.
Incorrect detergent use. Refer to 'Detergent' and follow the
detergent manufacturer’s instructions.
Excess food on dishware. Remove all food scraps prior to loading.
Spray arm holes blocked. Clean the spray arm.
Spray arm rotation
blocked.
Remove any protrusions below the rack
and ensure the spray arm can rotate freely.
Hard water. Increase the rinse aid setting and the
amount of detergent used. Refer to
'Water hardness'.
Hard water Increase the rinse aid setting and the
amount of detergent. Refer to
'Water hardness'.
Increase the water softener setting. Refer
to 'Water softener'.
Foaming Incorrect detergent use. Refer to 'Detergent'.
Egg left on plates. Rinse excess egg prior to loading.
Rinse aid setting too high. Decrease the rinse aid setting.
is flashing on
the display
The spray arm rotation is
obstructed.
Refer to 'Maintenance alerts'.
is flashing on
the display
Routine cleaning of the
filter is due.
Refer to 'Maintenance alerts'.
Water leaking Drain hose disconnected
from waste pipe.
Reconnect the drain hose to the
waste pipe.
Water inlet hose not
connected correctly.
Ensure the inlet hose is connected securely.
Other leaks. Turn water and power supplies to the
DishDrawer™ Dishwasher off. Call Customer
Care or your Authorised Service Centre.