Installation Guide
Table Of Contents
- Contents
- Introduction
- Safety and warnings
- Installation instructions
- Operating instructions
- Caring for your dryer
- Before you call for service
- Fault codes
- Troubleshooting
- Limited Warranty
- Introduction
- Table des matières
- Consignes de sécurité et mises en garde
- Instructions d’installation
- Instructions d’utilisation
- Entretien de votre sécheuse
- Avant d’effectuer un appel de service
- Codes de défaillance
- Dépannage
- Garantie limitée
10
INSTALLATION INSTRUCTIONS
Before making the electrical connection, turn off
the circuit breaker(s) or remove the dryer’s circuit
fuse(s) at the electrical box. Be sure the dryer cord is
unplugged from the wall.
IMPORTANT!
Never leave the access cover off the terminal block.
Dryer power cord kit
UL rated 120/240V, 30A with 3 or 4 prongs. Identify the plug type
as per the house receptacle before purchasing line cord. Stacking
installations may require a power cord up to 6feet (1.8m) in length.
The power cord is supplied in all models except for
DE4024P1 US dryer model. You need to provide your own power cord
for this model.
Connecting an electric dryer
Tools you will need:
Slip-joint pliers Level Phillips screwdriver Flat-blade screwdriver
Materials you will need:
Safety glasses Gloves 3/4” Strain relief
(UL recognized)