Installation Guide
Table Of Contents
- Contents
- Introduction
- Safety and warnings
- Installation instructions
- Operating instructions
- Caring for your dryer
- Before you call for service
- Fault codes
- Troubleshooting
- Limited Warranty
- Introduction
- Table des matières
- Consignes de sécurité et mises en garde
- Instructions d’installation
- Instructions d’utilisation
- Entretien de votre sécheuse
- Avant d’effectuer un appel de service
- Codes de défaillance
- Dépannage
- Garantie limitée
16
INSTALLATION INSTRUCTIONS
Final setup
Level the dryer
1 Stand the dryer upright near the final location
and adjust the four leveling legs at the corners to
ensurethat the dryer is level from side to side and
front to rear.
Plug dryer in
2 Note: stacking installations may require a power
cord up to 6feet (1.8m) in length.
Dryer startup
3 Press the ‘POWER’ button.
Note: if the dryer has been exposed to temperatures
below freezing for an extended period of time, allow
it to warm up before pressing ‘POWER’. Otherwise,
the display will not come on.
The dryer is now ready for use.
49-90571 19
Ensure proper
ground exists
before use.
Levelling the feet