INSTALLATION INSTRUCTIONS USER GUIDE Condenser clothes dryer DE8060P model NZ AU SG ROW
CONTENTS Introduction 2 Safety and warnings 3 Installation instructions 6 Getting started quickly 12 Dryer controls 14 Sorting and loading 15 Drying cycles 18 Drying cycle options 19 Caring for your dryer 22 Before you call for service 25 Fault codes 26 Troubleshooting 27 Manufacturer’s Warranty 33 Customer Care 35 Important! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject
introduction Welcome to your new condenser dryer Thank you for purchasing a Fisher & Paykel clothes dryer. Your new dryer gives you the convenience of tumble drying and your clothes the advantage of not being subjected to the harsh overdrying effects of the sun. Your clothes will feel softer, retain their shape better and require less ironing.
Safety and warnings Caution, risk of fire – this is a safety symbol. Failure to follow the warnings outlined in these user instructions can cause a fire hazard. ! WARNING! Fire Hazard ●● Only dry fabrics that have been washed with water. ●● Do not use heat to dry articles containing foam rubber or similarly textured rubber–like materials, dry on ‘Air Dry’. ●● Do not stop a tumble clothes dryer before the end of the drying cycle unless all items are removed and spread out in order to dissipate the heat.
Safety and warnings ●● ●● ●● ●● ●● ●● ●● ●● Children should be supervised to ensure they do not play with the dryer. Unplug the machine from the power supply when it is not in use. Do not swing or put weight on the door. Your dryer is designed to stop operating in the event of power outage. When power is resumed, the machine will remain off until the button is pressed. To restart the dryer, press , select your drying cycle and touch . Never attempt to repair the dryer yourself.
Safety and warnings ●● ●● ●● The dryer is not to be used if industrial chemicals have been used for cleaning. Fabric Softeners or similar products should not be used in a tumble dryer to eliminate the effects of static electricity, unless this practice is specifically recommended by the manufacturer of the fabric softener product.
INSTALLATION INSTRUCTIONS Please read and follow the ‘Safety and warnings’ and ‘Installation instructions’ sections carefully before using your dryer! Accessories Please check you received the following accessories with your Fisher & Paykel dryer. You will find them inside the drum: ●● ●● ●● 1 x Drying rack 1 x Drain hose 1 x Installation instructions and user guide Unpacking To ensure the best performance from your new dryer please follow the instructions below.
INSTALLATION INSTRUCTIONS Installation options Your dryer can be installed one of two ways, either freestanding, or stacked on top of a Fisher & Paykel front loading washer (specific models only). 1 Free standing The dryer stands on the floor and can easily be moved into position. 2 Stacking Your dryer has been designed to be able to be stacked on top of a Fisher & Paykel WashSmart™ or QuickSmart™ front loading washer (WH8560P, WH8060P and WH8560J models only).
INSTALLATION INSTRUCTIONS Draining The dryer is equipped with a condenser unit which accumulates water during the drying cycle. This water is collected in the removable water tank located at the top left of the dryer. The accumulated water must be emptied after each drying cycle. However you can also set up your dryer to drain automatically using the drain hose provided.
INSTALLATION INSTRUCTIONS Electrical connection 1 This appliance must be connected to a 220 V – 240 V, 50 Hz, sinusoidal, 10 A electrical supply. 2 Uncoil the power cord, remove and discard the plastic pin cover and plug into a power socket. 3 Connect the appliance to an earthed outlet protected by a fuse of suitable capacity. ●● ●● Check the power cord for damage and make sure it is not squashed or twisted when installing the dryer.
INSTALLATION INSTRUCTIONS Completing the installation Installation test cycle Important! Ensure the installation test cycle is completed before you dry any items in your dryer. This is to check that your dryer is installed correctly and that it is functioning properly prior to use. button. 1 Turn your dryer on by pressing the 2 Select the ‘Time Dry’ 30 cycle. Ensure the drum is empty and the door is closed (you will hear it click shut). button. The drum will start rotating.
INSTALLATION INSTRUCTIONS Machine specifications DE8060P Capacity (kg)* 8 Dimensions (mm) Width 600 Depth 645 Height** Length of drain hose 850 1300 Electrical Volts 220 – 240 HZ 50 Amps (maximum) 10 Heating Power (W) 1800 * Capacity refers to the maximum dry weight of items the machine can dry at any one time. Note: some cycles have a lower maximum capacity (see the ‘Drying cycles’ section).
Getting started quickly ●● ●● Check the lint filter is clean and the water tank is empty before every load. Ensure both are replaced correctly before using your dryer. Sort and load items into the dryer drum, ensuring no items are in the way of the door. Close the door (you will hear it click shut). to activate your dryer. 1 Press 2 Your dryer will default to the ‘Everyday’ cycle. Select your desired drying cycle by turning the SmartTouch™ Control Dial.
Getting started quickly ●● ●● ●● ●● If you make an invalid selection the dryer will beep to alert you. When the cycle finishes, your dryer will beep and then turn off automatically. If the ‘Wrinkle Free’ option has been selected the machine will rotate the drum periodically blowing cool air into the drum to help minimise wrinkling and creasing of your load. If you wish to stop your dryer at any point during a cycle simply touch to pause the cycle, then open the door.
dryer controls SmartTouch™ Control Dial The SmartTouch™ Control Dial provides easy and efficient drying cycle selection. As you rotate the dial, the icon of the drying cycle selected will be illuminated, along with the default settings for that cycle on the right side of the control panel. SmartTouch™ Control Dial SmartTouch™ buttons The smooth, easy clean buttons enable easy selection of options with lights clearly showing the selections you are making.
Sorting and loading When preparing your load there are some important things to consider: Sorting ●● ●● ●● ●● It is best that you sort your garments before placing them into the dryer. Sort into loads of similar items, and loads that will take similar times to dry. Heavier items (eg towels, t-shirts and flannelette sheets) are best dried separately from lightweight items (eg synthetics, polyester-cotton sheets and shirts).
Sorting and loading Before you load ●● ●● ●● Check pockets for items that could damage your clothes or get caught in the dryer. Close zippers, hooks and eyes, and other fastenings (ie fasten the openings of duvet/ doona covers), and remove loose bra wires. These may damage both your dryer and your clothes. Check the lint filter is clean and the water tank is empty (if the dryer is not set up to automatically drain).
Sorting and loading Drying times ●● ●● ●● ●● ●● Drying very small loads is inefficient. Try to dry medium to large loads. Heavier items (towels, T-shirts, flannelette sheets) will take longer to dry than light items (synthetics and polyester cotton sheets and shirts). Spin clothes at the highest spin speed suitable for the load type. The more water you remove in the wash, the less drying time required.
Drying cycles Your dryer has a number of drying cycles to suit your laundry needs. Selecting the most appropriate cycle for each particular load will help ensure you get the best result. Max. load size (kg) Default Dryness Level* Default Drying Temp 8 Dry High 8 Dry High Short, cool cycle for carefully drying delicate and heat sensitive fabrics. 4 Damp/Dry Low Business shirts and clothing that creases easily.
Drying cycle options All drying cycles default to the recommended options for that cycle based on the average expected load to be dried using that cycle. You can vary the options (eg ‘Dryness Level’, ‘Dry Temp’) to create your desired cycle. Note: some options are not available on some cycles, for clothes care reasons, or because the option is not appropriate for the cycle.
Drying cycle options Wrinkle Free If you wish to minimise wrinkling, select one of the ‘Wrinkle Free’ options. At the end of the cycle, the drum will rotate periodically and cool air will be circulated through the load to minimise wrinkling and creasing. This is particularly useful if you cannot remove the items immediately after the cycle ends. There are two wrinkle free options: ‘On’ provides ‘Wrinkle Free’ operation for 2 hours. ‘Extra’ provides ‘Wrinkle Free’ operation for 24 hours.
Drying cycle options Delay Start The ‘Delay Start’ option enables you to delay the start of the drying cycle from between 5 minutes and 12 hours. Times you can select are 5 min, 15 min, 30 min, 1 hour, then hourly up to 12 hours. This can be useful to time your drying to finish when you arrive home from work, or to start when power rates are lower. To programme a ‘Delay Start’, simply touch the ‘More’ button to increase the delay time and ‘Less’ button to decrease the time or to turn ‘Delay Start’ off.
Caring for your dryer When you have finished using your dryer ●● ●● ●● Unplug the machine from the power socket. Wipe around the door to remove any remaining condensation and foreign matter. Clear the lint filter and empty the water tank (if not set up to automatically drain). Cleaning your dryer Before you start cleaning your dryer, ensure that it is disconnected from the power (ie unplug the machine from the power socket).
Caring for your dryer Emptying the water collection tank: During the drying cycle steam condenses into water and is collected in the water tank, located at the top left of the dryer. It is important to empty the water tank after every load. There is an indicator light that will illuminate when the water tank needs emptying. A user warning will also be displayed on the screen (refer to the 'Before you call for service' section).
Caring for your dryer Cleaning the sensors: There are humidity sensors in your machine that detect whether the laundry is dry or not. These sensors need to be cleaned periodically (we recommend approximately four times a year). 1 2 3 4 24 To clean the sensors: Open the door of your machine. Allow the machine to cool if drying has been carried out. Locate the metal sensors just behind the lint filter. Wipe the sensors with a soft cloth, dampened with vinegar. Dry the sensors with a dry cloth.
Before you call for service User warnings Your dryer is capable of diagnosing a number of its own problems. It will sound a continuous series of beeps and display a code when it has a problem that you can correct yourself. All control panel lights will turn off and a code will be displayed to inform you what the problem is. To stop the beeps sounding, press any button on the control panel. Do not try to continue your drying cycle once you stop the noise.
Fault codes When a continuous series of beeps is sounded, all the lights turn off on the control panel and a number appears on the display, a fault has occurred. The dryer will automatically enter this mode if a fault occurs. The fault code will be displayed as followed by a number on the digital display. To stop the beeps, touch any button then perform the following steps: 1 2 3 4 5 6 7 Turn your machine off at the power point. Wait one minute and turn it back on.
troubleshooting The following is a list of problems you may encounter when using this appliance and some suggestions that may help to correct the problem. If you still have problems, please contact your Fisher & Paykel Authorised Repairer. Problem Possible causes What to do Pressing does not turn on the dryer. Electrical cord not plugged into a power socket. Plug cord into a power socket. Power switch not switched on. Switch power on. Fault with household power supply.
troubleshooting Problem Possible causes What to do Dryer keeps stopping and starting. The ‘Wrinkle Free’ option has been selected. Refer to page 20 for more information. Dryer stops working midcycle. Power failure. Press cycle. Dryer has been paused. Touch the cycle. Dryer door is open. Ensure the door is firmly shut. Drying cycle selected not appropriate for the load. Select an appropriate cycle for the load. Refer to pages 15 and 18. Dryness level selected not appropriate for the load.
troubleshooting Problem Possible causes What to do Dryer is not draining. Drain hose not connected to the water tank. Ensure the drain hose is connected correctly (refer to page 8). Water tank not in place correctly. Ensure water tank is properly in place. Drain hose or drain blocked or damaged. Check drain hose (if connected) and drain for blockages or damage. Cycle selected not appropriated for the load. Ensure the cycle selected is appropriate for items in the load. Refer to pages 15 and 18.
troubleshooting Problem Possible causes What to do Cycle time longer than usual. Cycle time may be affected by a number of factors and is approximate. Cycle time is affected by the size and composition of the load, how wet/dry the load was to begin with, the environmental conditions the dryer is operating in, cycle options selected, sensing while drying and any interruptions during the cycle. Refer to page 14. Small amount of water in the drum at end of cycle. Water tank needs to be emptied.
troubleshooting Problem Possible causes What to do Linting. Lint filter not cleaned or replaced. Ensure the lint filter is cleaned after every cycle and replaced correctly. Refer to page 22. Dryer is overloaded. Remove some items from the dryer. Loads not sorted correctly. Dry lint givers separately from lint receivers. Refer to page 17. Also, dry similar colours together eg light coloured items with light coloured items, dark items with dark items. Refer to page 17. Clothes over dried.
troubleshooting Problem Possible causes What to do Dye transfer. White/ light and coloured items not separated before drying. Remember to separate white/light and coloured items before placing them in the dryer. Wet items left sitting in the dryer for long periods of time before drying. Do not leave wet items sitting in the dryer for long periods of time before drying, if they may be prone to colour run.
Manufacturer’s Warranty You automatically receive a 2 year Manufacturer’s Warranty with the purchase of this Condenser clothes dryer covering parts and labour for servicing within the country of purchase. Fisher & Paykel undertakes to: Repair or, at its option, replace without cost to the owner either for material or labour any part of the product, the serial number of which appears on the product, which is found to be defective within TWO YEARS of the date of purchase.
Manufacturer’s Warranty Service under this Manufacturer’s Warranty must be provided by a Fisher & Paykel Authorised Repairer (refer to the ‘Customer Care’ section at the back of this book). Such service shall be provided during normal business hours. This warranty certificate should be shown when making any claim. For Australian Customers This warranty is an extra benefit and does not affect your legal rights. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
customer care Before you call for service or assistance... Check the things you can do yourself. Refer to your user guide and check: 1 Your product is correctly installed. 2 You are familiar with its normal operation. 3 You have read the ‘Before you call for service’, ‘Fault codes’ and ‘Troubleshooting’ sections at the back of the book.
customer care *If you call, write or contact our website please provide: your name and address, model number, serial number, date of purchase and a complete description of the problem. This information is needed in order to better respond to your request for assistance. Product details can be found on the rear of the machine, and/or on the inside of the door below the glass (when the door is open). Registration Register your product with us so we can provide you with the best service possible.
www.fisherpaykel.com Copyright © Fisher & Paykel 2014. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your dealer to ensure this booklet correctly describes the product currently available. NZ AU SG ROW 427997 A 08.
