Condensing Dryer, 8kg

37
TROUBLESHOOTING
The following is a list of problems you may encounter when using this appliance and some
suggestions that may help to correct the problem. If you still have problems, please contact
your Fisher & Paykel trained and supported service technician.
PROBLEM POSSIBLE CAUSES WHAT TO DO
Pressing POWER
does not turn
on the dryer.
Electrical cord not plugged into
a power socket.
Plug cord into a power socket.
Power switch not switched on. Switch power on.
Fault with household
power supply.
Try plugging another electrical
appliance into the same socket. Turn
off the power at the power point.
Unplug the dryer from the power
socket. Wait 60seconds, plug it back
in, turn it on and try again.
Dryer does
not heat.
Dryer set to
COOL AIR cycle. Check what cycle the dryer is set to.
Refer to ‘Drying cycles’. Change to
preferred cycle.
Full water tank. Empty the water tank. Refer to ‘Caring
for your dryer’.
The dryer has progressed
to
COOL.
Check the progress lights– are
COOLorEND lights illuminated?
Referto‘Control panel’.
Touching
does
not start the
drying cycle.
not touched firmly enough. Touch again.
Dryer is paused.
light will be flashing. Touch to
resume the cycle.
Dryer door not closed properly. Open and reclose the door.
Is the dryer displaying a user
warning or fault code?
Refer to ‘User warnings’ and
’Fault codes’.
Water tank full or not properly
in place.
Empty the water tank. Refer to ‘Caring
for your dryer’. Ensure the water tank
is properly in place.
Lint filter needs to be emptied. Empty the lint filter and ensure it is
correctly in place.
Dryer is overloaded. Remove some items from the dryer.
DELAY START function is set. Refer to ‘DELAY START’ for
more information.