Installation Guide

Note: Riser height 45mm
(to be manufactured and fitted by a cabinetmaker)
UNDER BENCH
VENTED DRYER AND WASHER
Washer: WA8560P/E/G, WL8060P, WA7560E, WA7060G/M
Dryer: DE7060P/G, DE6060M, DE5060M, DE4560M
CAVITY DIMENSIONS mm
A
Height to under bench 915
B
Width 1260
Depth 660
Cut out dimensions above are to be used as minimum dimensions.
Note: Power plug must be accessible.
UNDER BENCH
CONDENSING DRYER AND WASHER
Washer: WA8060P/E/G, WL8060P, WA7560E, WA7560G/M
Dryer: DE8060P, DH8060P/C, DC8060P, DH9060P/C
CAVITY DIMENSIONS mm
A
Height to under bench 915
B
Width 1260
Depth 660
Cut out dimensions above are to be used as minimum dimensions.
Note: Power plug must be accessible.
OVERHEAD INVERT
WASHER AND VENTED DRYER
Washer: WA8560P/E/G, WL8060P, WA7560E, WA7060G/M
Dryer: DE7060P/G, DE6060M, DE5060M, DE4560M
CAVITY DIMENSIONS mm
A
Height to under cabinet 2315
B
Width 640
Depth 660
C
Height of washer with lid open 1350–1385
Cut out dimensions above are to be used as minimum dimensions.
Note: Power plug must be accessible.
The models shown in this document may not be available in all markets and are subject to
change at any time. For current details about model and specification availability in your
country, go to our website fisherpaykel.com or contact your local Fisher & Paykel dealer.
Note: Riser height 65mm
(to be manufactured and fitted by a cabinetmaker)
A
B
C
A
B
A
B
A
B
C
A
B
A
B
A
B
C
A
B
A
B
428179D 03.19
TOP LOAD WASHERS AND
FRONT LOAD DRYERS
CAVITY SIZES REQUIRED FOR INSTALLATION
NZ AU
WA8560P/E/G, WL8060P, WA7560E, WA7060G/M, DE8060P, DH8060P/C
DE7060P/G, DE6060M, DE5060M, DE4560M, DC8060P & DH9060P/C models