Installation Guide

INSTALLATION INSTRUCTIONS
12
Draining
The dryer is equipped with a condenser unit which accumulates water during the
dryingcycle. This water is collected in the removable water tank located at the top leftof
the dryer. The accumulated water must be emptied after each drying cycle or you can setup
your dryer to drain automatically using the drain hoseprovided.
We recommend the dryer is set up to drain automatically where possible especially when
drying full loads, this will avoid having to empty the water tank during a drying cycle.
1
Connecting the drain hose
Remove the black hose from the connection
at the back of the dryer.
Uncoil the drain hose (included with your
dryer) and connect it to the black hose.
Place the other end of the drain hose into a
tub or standpipe.
2
3