Pairing Guide

9
SIDE BY SIDE INSTALL – PLUMBING & ELECTRICIAL
ELECTRICAL
Supply
220–240 V, 50 Hz
Service
10 amp circuit
PLUMBING
Pressure
max 1 MPa (150psi)
min 30 kPa (4.5psi)
Flow rate at tap
Min. 6 litres/minute
Cold water temp
max 35°C
Hot water temp
max 65°C
Hot water inlet may not be an option for your washer model, refer to your washer
installation guide.
SERVICE DIMENSION
WASHER DRYER
MM MM
A Length of drain hoses 1500 1300
B Length of power cord 1500 1500
C Length of cold water inlet hose 1500 650*
D Length of hot water inlet hose 1500 n/a
 Only present for DH9060FS model dryers
 Only present for WH8060
* Cold water inlet hoses can be interchanged between washer and dryer
Front Loading Washer
WH1060P3, WH9060, WH8560
WH8060P
Heat Pump or Condensing Dryer
DH9060, DE8060, DH8060
SPECIFICATIONS
WASHER DRAINAGE HEIGHTS
DRYERWASHER
Power Supply
Water
Supply
d c c b a
b a
c
600mm min
1000mm max*
* Recommended standpipe height is 800mm