User Guide
Table Of Contents
- Safety and warnings
- Control panel
- WiFi connection
- Dry cycles
- Dry preparation
- Getting started quickly
- Drying cycle options
- Customising a dry cycle
- Caring for your dryer
- Before you call for service
- Fault codes
- Troubleshooting
- Energy consumption & cycle times
- Manufacturer’s warranty
- Customer care
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
11
CONTROL PANEL
1
If a button is pressed while KEYLOCK is
activated, the LED above KEYLOCK will flash.
To turn your dryer on:
Press
POWER , then press and hold the
KEYLOCK two seconds. This will activate the
control panel. Dry cycles and options can now
be selected.
1
Press for two seconds.
When activated, the light above the
button
is illuminated.
Keylock
Keylock can be used to lock the buttons on your dryer when not in use. This will avoid
accidental button pushes.
To turn Keylock
ON or OFF:
If Keylock is
ON and the dryer is turned OFF:
2
To stop or power OFF your dryer at any time:
Press
POWER .