User Guide
Table Of Contents
- Safety and warnings
- Control panel
- WiFi connection
- Dry cycles
- Dry preparation
- Getting started quickly
- Drying cycle options
- Customising a dry cycle
- Caring for your dryer
- Before you call for service
- Fault codes
- Troubleshooting
- Energy consumption & cycle times
- Manufacturer’s warranty
- Customer care
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
12
Your appliance can be connected to your home wireless network and operated remotely
using the app.
Getting started
z
Ensure your home WiFi network is turned on.
z
You will be given step by step guidance on both your appliance and mobile device.
z
It may take up to 10 minutes to connect your appliance.
WIFI CONNECTION
On your mobile device:
1 Download the app from www.fisherpaykel.com/connect
2 Register and create an account.
3 Add your appliance and set up the WiFi connection.
4 Follow the prompts in the app to complete the setup.
Connecting to your home WiFi
Turning off your home WiFi
To reconnect to your home WiFi, repeat the steps in ‘Connecting to your home WIFI’.
+
+
Press and hold
and SIGNAL buttons
simultaneously for three seconds to
disconnect the WiFi and switch off the LED.
Press and hold
and SIGNAL buttons
simultaneously for three seconds.
The
LED will flash continuously until a
stable connection is achieved.
Once connected, the LED stops flashing and
will remain illuminated.