User Guide
Table Of Contents
- Safety and warnings
- Control panel
- WiFi connection
- Dry cycles
- Dry preparation
- Getting started quickly
- Drying cycle options
- Customising a dry cycle
- Caring for your dryer
- Before you call for service
- Fault codes
- Troubleshooting
- Energy consumption & cycle times
- Manufacturer’s warranty
- Customer care
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
18
GETTING STARTED QUICKLY
4
If you wish to change a cycle or select a
different option once a drying cycle has
started, press then select the new
cycle or option.
Press
to restart thedryer with the new
cycle and/or settings.
When the cycle finishes, your dryer will beep and then turn off automatically. If theWRINKLE
FREE
option has been selected the dryer will rotate the drum periodically blowing cool air
into the drum to help minimise wrinkling and creasing ofyour load.
If you wish to stop the dryer before the cycle has finished you MUST remove the clothes
IMMEDIATELY and spread them out to cool. DO NOT leave the clothes in the dryer or
bunched up in a clothes basket. Take extreme care as the drum and the load items may be
extremely hot.
Failure to follow the advice in this guide may result in damage to your garments and your
expectations of drying performance may not be met.