User Guide

9
!0
!2!1
1 POWER Press to turn the dryer ON/OFF.
2 Keylock Press to disable all buttons on the display panel, except
POWER
button. This prevents accidental button presses.
3 SmartTouch™
control dial
Rotate to select your desired drying cycle.
z
The icon illuminates to indicate the selected drying cycle.
4 Digital display
screen
Shows the following:
z
TIME TO GO – the remaining time in the cycle that is
currently running.
z
Delayed start time of dry cycle.
z
Notifications if an error is detected or a warning is necessary.
5 Progress lights The progress lights indicate what part of the cycle the dryer has
reached (
DRY, COOL or END). All three lights are on at the start of
the cycle. The light for the current part of the cycle flashes, and
each one goes out as the cycle progresses.
6 Delay Start
Less/More
Press
MORE to increase andLESS to decrease the delay
start time.
7 Dryness Level Allows you to select the level of dryness for your load.
8 Wrinkle Free Allows you to select a
WRINKLE FREE option for your cycle.
9 Signal This button has two functions:
z
Alert you that the dryer has finished.
z
Alert you to remove items once your load reaches the
damp dry stage.
!0 Water Tank,
Condenser, Lint
Filter
The lights will flash when the dryer is switched on as a
remindertoempty the water filter, or clean the condenser and
lintfilter. The warning light will also flash on and off during the
cycle if the filtersbecome blocked.
!1 WIFI
The LED beside
illuminates when functionality is activated.
!2 START/PAUSE Press to start or pause the selected drying cycle.
2
3 6 7 8 9
1 5
4
CONTROL PANEL