User Guide
Table Of Contents
- Safety and warnings
- Controls and starting a wash
- Setting Delay Start
- Setting wash modifiers (DW60FC6 and DW60UC6 models)
- Setting a 1/2 load (DW60FC6 and DW60UC6 models)
- User preference settings
- Caring for your dinnerware
- Loading advice
- Water hardness and dishwashing
- Wash programmes and detergent quantities
- Adding detergent
- Using rinse aid
- After the wash
- Care and cleaning
- Fault codes
- Troubleshooting
- Warranty and service
- Wash programme data
- Standards test (DW60FC1 models only)
- Standards test (DW60FC2 and DW60UC2 models only)
- Standards test (DW60FC4/C6 and DW60UC6 models only)
11
LOADING ADVICE
When loading your dishwasher
●
Place items so that water coming from the rotating spray arms below can reach all
areas. Especially items on the foldaway cup racks. Wash performance will be reduced if
it can’t.
●
Ensure glass and other fragile items are stable, so that they do not accidentally topple
and break during the wash.
●
Any flimsy or light plastic items should be either weighted down or placed on the cup
racks or in the cutlery tray.
●
Ensure there are no dishware items that will stop the spray arms from rotating.
●
Overcrowded and wash water will not
reach some of the dinnerware.
●
Cups, glasses and bowls must have
their openings facing down.
●
The plates are nesting together and
wash water may not get through.
●
Ensure cutlery and utensils are not
nesting or stuck together. They need to
be evenly spread out.