User Guide
Table Of Contents
- Safety and warnings
- Controls and starting a wash
- Setting Delay Start
- Setting wash modifiers (DW60FC6 and DW60UC6 models)
- Setting a 1/2 load (DW60FC6 and DW60UC6 models)
- User preference settings
- Caring for your dinnerware
- Loading advice
- Water hardness and dishwashing
- Wash programmes and detergent quantities
- Adding detergent
- Using rinse aid
- After the wash
- Care and cleaning
- Fault codes
- Troubleshooting
- Warranty and service
- Wash programme data
- Standards test (DW60FC1 models only)
- Standards test (DW60FC2 and DW60UC2 models only)
- Standards test (DW60FC4/C6 and DW60UC6 models only)
18
CARE AND CLEANING
Over time, food residue or limescale deposits may accumulate inside your dishwasher.
These may reduce efficiency, and food residue may produce a bad odour. Inspect and
clean your dishwasher regularly.
IMPORTANT !
●
Before any cleaning or maintenance, always disconnect the dishwasher from the
power supply, turn off the water supply, and wait until all parts of the dishwasher
have cooled.
●
Do not use the following cleaning aids, as they may damage the surfaces:
– plastic or stainless steel scouring pads
– abrasive, solvent, household cleaners
– acid or alkaline cleaners
– laundry detergents or disinfectants
– stainless steel cleaners or polishes
– hand-washing liquids or soap
●
Where there is broken crockery or glass in the dishwasher, it must be carefully
removed to prevent personal injury or damage to the appliance.
●
After cleaning, always check that the spray arms and filters are all correctly in place.