User Guide
Table Of Contents
- Safety and warnings
- Controls and starting a wash
- Setting Delay Start
- Setting wash modifiers (DW60FC6 and DW60UC6 models)
- Setting a 1/2 load (DW60FC6 and DW60UC6 models)
- User preference settings
- Caring for your dinnerware
- Loading advice
- Water hardness and dishwashing
- Wash programmes and detergent quantities
- Adding detergent
- Using rinse aid
- After the wash
- Care and cleaning
- Fault codes
- Troubleshooting
- Warranty and service
- Wash programme data
- Standards test (DW60FC1 models only)
- Standards test (DW60FC2 and DW60UC2 models only)
- Standards test (DW60FC4/C6 and DW60UC6 models only)
22
FAULT CODES
FAULT
CODES AND
DESCRIPTIONS
POSSIBLE CAUSES WHAT TO DO
F30
Flooding
Flood switch
activated.
Turn the dishwasher OFF and ON again. If
fault persists, turn water off and disconnect
the dishwasher from the power supply. Call
Customer Care.
F40
Water flow error. Switch dishwasher OFF and ON again. If fault
persists call Customer Care.
F50
Electronics error. Switch dishwasher OFF and ON again. If the
fault persists call Customer Care.
A60
Water temperature
error.
Switch dishwasher OFF and ON again. If fault
persists call Customer Care.
F90
(DW60FC6 only)
Data/electronics
error.
Switch dishwasher OFF and ON again. If fault
persists call Customer Care.
FA0
Electronics/power
supply error.
Switch dishwasher OFF and ON again. If fault
persists call Customer Care.
AD0
(DW60FC6 only)
Doorlock
signal error.
Switch dishwasher OFF and ON again. If fault
persists call Customer Care.
FCO
(DW60FC6 only)
Motor fault. Switch dishwasher OFF at the power supply.
Wait a few moments and switch ON again.
If the fault persists, turn water off and
disconnect from the power supply. Call
Customer Care.