Installation Guide

7
Before installation
IMPORTANT!

The appliance has front and rear rollers for moving the appliance forward and
backward. Do not move the appliance sideways to avoid damaging the rollers or
thefloor covering/surface.

Connection to electrical power and earthing must comply with local codes
andordinances and be made by licensed personnel when required.
Avoid installation of the appliance/s under a ground fault circuit interrupter (GFCI).

Ensure the appliance is installed properly. Improper installation that results in
appliance failure is not covered under the appliance warranty.
Check the installation location. Check the cabinetry. If using a kit to integrate your
product then check the dimensions of the cabinetry (width, depth, height, floor level,
finished alcove returns). Ensure that the ventiallation openings in the cabinetry are
clearof obstruction.
Check the power supply connection

Ensure that there is a separate power socket for each appliance.

Avoid sharing the power point with other appliances to prevent accidental
switching off of the appliance.

For power requirements, please refer to the information on the serial plate.

Ensure your appliance is properly grounded (earthed).

Connect your appliance to an electrical supply with the fitted plug and lead.

The appliance must be installed so the plug is accessible. For integrated appliance
(using our optional integrattion kit system) then we recommend to use an isolating
switch that is easily accessible to the user after the appliance is installed.

Follow local codes and ordinances when installing the appliance.
Check your appliance

Ensure that your appliance is the correct model as per your order.

Check that the packaging is not damaged upon delivery.

Ensure the components listed are complete.
IMPORTANT!

Be careful when unpacking to prevent damage to the surface of your appliance.

Ensure that the appliance is stable to prevent it tipping when unpacking.
INSTALLATION INSTRUCTIONS