User Manual
12
INSTALLATION INSTRUCTIONS
4. Installation
Your Fisher & Paykel refrigerator is fitted with
front and rear rollers, designed for moving
the product in the forwards and backwards
direction.
Avoid moving the product in a sideways
direction as this may damage the rollers or the
floor covering/surface.
A
Your refrigerator will arrive with the front feet
wound up making moving the product into its
final location a simple task.
B
Roll the refrigerator into its final position making sure there is the correct air gap
between the product and surrounding cabinetry. See minimum clearance in cabinetry
dimensions table.
C
Adjust the front feet down until the refrigerator is leaning backward with the front
approximately 10mm higher than the back. This will ensure a good door closing action.
D
Aligning your refrigerator with cabinetry.
Align the sides of the refrigerator with the cabinetry by adjusting the hinge side
frontfoot.
Adjust the handle side foot until it touches the floor and takes a small amount
ofweight.
Once the refrigerator is in place and aligned with cupboards/alcove gently push on
the front top and check if the product is rocking or stable.
Raise the front of
the refrigerator
Lower the front
of the refrigerator
Refrigerator feet