Data Sheet Built-in Coffee Maker with 30" Trim

DATA SHEET
Coee Maker with Trim Kit
DATE: 18.06.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
Model no:
EB24DSXB1 with TK30NDB1, EB24DSXBB1 with TK30NDBB1
(refer page 2 for metric measurements)
Product Dimensions
inches
a Overall height of coffee maker and trim kit
18 1/16"
B Overall width of coffee maker and trim kit
29 1/16"
c Overall depth of coffee maker and trim kit (excludes front
metal trim)
22 1/2"
d Height of chassis and trim kit support brackets
18 5/16"
e Width of chassis and trim kit support brackets
22 1/16"
f Depth of chassis and trim kit support brackets
20 7/8"
g Width of coffee maker
2 7/16"
h Depth of coffee maker front frame and control panel (excludes
front metal trim)
1 5/8"
i Height of control panel
 15/16"
j Height of metal cap on control panel
1/16"
k Height of horizontal lower section (includes glass and grille)
4 1/8"
l Height of trim grille
1/16"
m Height of trim kit support brackets
1/16"
n Stepdown from control panel to chassis
1/2"
o Extent coffee maker pulls out (measured from glass front)
17 1/8"
Minimum Clearances
Inches
Minimum inside height of cavity (proud installation)
18 1/2"
Minimum inside width of cavity
22 1/16"
Minimum inside depth of cavity from front datum
22 1/16"
Overall height of cabinetry (cavity around front frame)
18 7/8"
Overall width of cabinetry (cavity around front frame)
29 15/16"
Rear ventilation air vent depth*
2"
Rear ventilation air vent width*
22 1/16"
*A rear ventilation air vent totalling 4.4in is required. The air vent must be
located at the rear of cabinet, it can be positioned at the base, sides, back or
top of the cavity.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
A
B
C
D
E
F
h
j
I
k
n
o
PLAN VIEW
PROFILE VIEW
FRONT VIEW
DATUM :
BOTTOM OF CHASSIS
DATUM : FRONT OF CHASSIS
DATUM :
FRONT OF CHASSIS
AIR VENTILATION
l
m
g
29 1/16"
18 1/16"
20 7/8"
NOT TO SCALE
TK30NDB1, TK30NDBB1
TRIM KIT
EB24DSXB1, EB24DSXBB1
COFFEE MAKER
SPACERS, OPTIONAL.
SUPPLIED WITH
COFFEE MAKER