Image AUTOMATIC BEAN TO CUP COFFEE MACHINE EB60 model USER GUIDE NZ AU GB IE
CONTENTS Appliance parts 2 Safety and warnings 4 First use 9 Menu settings 13 Making coffee 17 Making cappuccinos and milk-based coffees 21 Delivering hot water 24 Steam delivery 25 Customising beverages 26 Memorising your personal profile 27 Cleaning 28 Descale 34 Water softener filter 37 Displayed messages 39 Troubleshooting 44 Warranty and service 46 IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject
APPLIANCE PARTS Beans container lid Beans container Ground coffee funnel Interior lighting Control panel Grinding adjustment dial On/Off/ stand-by button Infuser Spouts Cup light Hot water/steam connection nozzle Coffee guide Service door Cup tray Coffee grounds container Drip tray 2
APPLIANCE PARTS Measure compartment Power cord Power plug Main switch Water tank Tray for objects ACCESSORIES Ground coffee measure ‘Total Hardness Test’ indicator paper Milk container Lid with milk frother Frothed milk spout (adjustable) Water softener filter (some models only) Milk intake tube Froth adjustment and clean dial Lid release buttons Steam wand Milk container Descaler Thermal casing Cleaning brush Connection nozzle cover 3
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTIONS Your safety is important to us. Keep the following instructions in mind when you are using your coffee maker. Failure to observe the instructions could result in electric shock, serious injury, burns, fire, or damage to the appliance. Save these instructions. WARNING! Cut Hazard Take care – some edges are sharp. Failure to use caution could result in injury or cuts. WARNING! Electrical shock hazard Never touch the appliance with damp hands.
SAFETY AND WARNINGS WARNING! Hot surface hazard Accessible parts may become hot when in use. This appliance produces hot water and steam may form while it is in operation. Avoid contact with splashes of water or hot steam. Use knobs and handles.
SAFETY AND WARNINGS ● ● ● ● ● ● ● ● ● ● ● 6 The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
SAFETY AND WARNINGS ● ● ● ● ● ● ● ● ● ● Appliances with removable cord: avoid splashes of water on the power cord connector or socket at the back of the appliance. WARNING: Models with glass surfaces: do not use the appliance if the surface is cracked. This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazard involved.
SAFETY AND WARNINGS ● ● ● ● ● ● ● ● ● ● 8 Do not use the appliance when pulled out from the cabinet. Make sure the appliance is inactive before pulling it out. The only exception is adjusting the coffee mill which must be done with the machine pulled out (see section “Adjusting the coffee mill”). Use original or manufacturer recommended accessories and spare parts only. Never turn off the machine during descaling.
FIRST USE Checking the appliance After removing the packaging, make sure the product is complete. If the appliance is damaged, contact customer support. Note: that coffee has been used to factory test the appliance, so it is possible that there may be traces of coffee in the mill. ● You should customise water hardness as soon as possible following the instructions in section ‘Setting water hardness’. 1 Connect the appliance to the mains 2 Make sure the main switch on the side electricity supply.
FIRST USE Follow the instructions indicated on the appliance display: 1 FILL TANK WITH 2 Open the lid. 3 Fill with fresh water to the 4 Close the lid and put 5 INSERT WATER SPOUT: 6 Place a container FRESH WATER: remove the water tank. the tank back in the appliance. ● ● ● ● 10 Check that the steam wand is inserted on the connection nozzle. MAX line (marked on the inside of the tank). underneath the spouts. 7 WATER CIRCUIT EMPTY PRESS OK TO START FILLING PROCESS.
FIRST USE Turning the appliance on IMPORTANT! During rinsing, a little hot water comes out of the coffee spouts and is collected in the drip tray underneath. During this cycle, keep hands clear of the spout to avoid contact with the water. ● ● ● Note: Before turning the appliance on, make sure the main switch is pressed. Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The appliance is ready for use only after completion of this cycle.
FIRST USE Measuring and setting water hardness How frequently the appliance alerts you that a descale is required, is determined by the level of water hardness. The appliance has a default water hardness setting of 4. However, to ensure the continued high performance of your coffee maker, it is important to measure the water hardness before the first use. Measuring water hardness 1 Remove the ‘total hardness test’ indicator paper from its pack.
MENU SETTINGS Rinsing Use this function to deliver hot water from the coffee spouts and steam wand, to clean and heat the appliance’s internal circuit. Place a container under the coffee and hot water spouts. IMPORTANT! Do not leave the appliance unattended while hot water is being delivered. 1 Press 2 Press . or until RINSING appears on the display. to start rinsing. 3 Press 1 After a few seconds, hot water is delivered first from the coffee spouts, then from the steam wand (if inserted).
MENU SETTINGS 1 2 3 4 5 Set time To adjust the time on the display: Press . Press or until SET TIME appears on the display. Press . The time setting panel will appear on the display. Set the current time by pressing or . To confirm, press (to cancel, press BACK), then press BACK to go back to the home screen. Auto-start You can set the auto-start time in order to have the appliance ready at a certain time (eg in the morning) so that the appliance is ready to make coffee immediately.
MENU SETTINGS Coffee temperature To modify the temperature of the water used to make the coffee: 1 Press 2 Press . or until SET COFFEE TEMPERATURE appears on the display along with the current selected temperature of: low, medium, high or maximum. 3 Press SET COFFEE TEMPERATURE until the required temperature is displayed. Note: a different temperature can be set for each profile (see section ‘Memorising your personal profile’).
MENU SETTINGS 5 INSERT GROUNDS CONTAINER AND DRIP TRAY: insert the drip tray complete with grounds container. 6 PLACE 2L CONTAINER UNDER SPOUTS, PRESS OK TO START: position a container under the coffee spouts and hot water spout. Press . 7 RINSING UNDERWAY, PLEASE WAIT: the appliance performs a rinse cycle from the coffee spouts. Do not leave the appliance unattended while hot water is being delivered. 8 EMPTY WATER TANK: extract the tank and empty it completely, then press.
MAKING COFFEE Selecting the strength of coffee Select the required strength by pressing STRENGTH : STRENGTH Very Light Light Medium Strong Extra Strong Customised strength – if programmed Pre-ground coffee After delivering the drink, the strength setting is reset to the value. Selecting the coffee size Select the required size of coffee delivered by pressing SIZE from the display.
MAKING COFFEE Using coffee beans IMPORTANT! Do not use green, caramelised or candied coffee beans as they could stick to the coffee mill and make it unusable. 1 Fill the beans container with coffee beans. 2 Place a cup under the coffee spouts. 3 Lower the spouts as near as possible to the cup. This makes for a creamier coffee.
MAKING COFFEE Making coffee using pre-ground coffee IMPORTANT! ● ● Never add pre-ground coffee when the machine is off or the grounds could spread through the inside of the appliance which may cause damage. Never use more than one level measure or it could dirty the inside of the coffee maker or block the funnel. Note: if you use pre-ground coffee, you can only make one cup of coffee at a time. 1 Press STRENGTH repeatedly until appears on the display. 2 Open the lid.
MAKING COFFEE Making long coffee IMPORTANT! Halfway through preparation, the message ADD PRE-GROUND COFFEE, MAXIMUM ONE MEASURE will be displayed. Add one level measure of pre-ground coffee and press . ● ● ● Tips for a hotter coffee If you prefer a hotter coffee, you should: Perform a rinse cycle by selecting the RINSING function in the settings menu. Warm the cups with hot water using the hot water function (see section ‘Delivering hot water’).
MAKING CAPPUCCINOS AND MILK-BASED COFFEES Note: to avoid milk with poor froth or large bubbles, always clean the milk container lid and hot water connection nozzle as described in sections ‘Cleaning the milk container’ and ‘Cleaning the steam wand connection nozzle’. Filling and attaching the milk container 1 Remove the lid. ● ● 2 Fill the milk container with a sufficient quantity of milk, not exceeding the MAX level marked on the container.
MAKING CAPPUCCINOS AND MILK-BASED COFFEES Adjusting the amount of froth Turn the froth adjustment dial on the milk container lid to adjust the amount of froth delivered while making milk-based coffees. Follow the recommendations in the table below: DIAL POSITION FROTH RECOMMENDED FOR None Latte / Hot milk Minimum Latte or Macchiato Maximum Cappuccino Making cappuccinos and milk-based coffees automatically 1 Fill the milk container and attach it as described above.
MAKING CAPPUCCINOS AND MILK-BASED COFFEES Cleaning the milk container after use IMPORTANT! When cleaning the internal tubes of the milk container, a little hot water and steam may leak out of the frothed milk spout. Take care to avoid burns from hot splashes of water. Each time you use a milk function, TURN DIAL TO POSITION TO START CLEANING appears on the display and the milk frother lid must be cleaned: 1 Leave the milk container in the machine (you do not need to empty it).
DELIVERING HOT WATER IMPORTANT! Do not leave the appliance unattended while hot water is being delivered. 1 Make sure the steam wand is attached correctly to the hot water/steam connection nozzle. 2 Place a container under the spout (as close as possible to avoid splashes). 3 Select HOT WATER The appliance delivers hot water and a progress bar appears on the display and fills gradually to indicate the stage of completion. The delivery of hot water stops automatically.
STEAM DELIVERY IMPORTANT! ● ● Do not leave the appliance unattended while steam is being delivered. Always stop steam delivery before extracting the container filled with liquid to avoid burns from splashes. 1 Make sure the steam wand is attached correctly to the hot water/steam connection nozzle. 2 Fill a container with water to be heated or milk to be frothed and immerse the spout in the liquid. 3 Select STEAM from the display.
CUSTOMISING BEVERAGES Drinks can be customised by altering the strength and size of coffee delivered. IMPORTANT As part of customising the settings, coffee and milk will be delivered. So place a cup or container below the spouts. 1 Make sure the profile you want to customise is active. The current active profile 2 3 4 5 6 7 8 will be displayed on the home screen. To change the active profile, select the profile on display, then select from one of the six profile icons you would like to make active.
MEMORISING YOUR PERSONAL PROFILE The appliance allows you to memorise six different profiles, each associated with a different icon. The customised MY beverages strength and size values are saved in each profile (see section ‘Customising the beverages ’). The order in which all the beverages are displayed is based on the frequency of selection. To select or enter a profile, press on the profile currently in use , press or until the required profile is displayed, then press on the profile.
CLEANING ● ● ● ● ● ● ● ● ● ● Cleaning the appliance The following parts of the appliance must be cleaned regularly (refer to page 2): The appliance’s internal circuit. Coffee grounds container. Drip tray. Water tank. Coffee spouts. Pre-ground coffee funnel. Infuser, accessible after opening the infuser door. Milk container. Hot water/steam connection nozzle. Control panel. IMPORTANT! ● ● ● Do not use solvents, abrasive detergents or alcohol to clean the coffee maker.
CLEANING To clean (with the appliance on): 1 Open the bottom door. 2 Remove the drip tray, empty and clean. 3 Empty the grounds container and clean thoroughly to remove all residues left on the bottom. This can be done using the spatula or the brush provided. IMPORTANT! When removing the drip tray, the grounds container must be emptied, even if it contains few grounds. If this is not done, when you make the next coffees, the grounds container may fill up more than expected and clog the machine.
CLEANING Cleaning the inside of the coffee maker IMPORTANT! Before cleaning internal parts, the appliance must be turned off (see section ‘Turning the appliance off’) and unplugged from the mains power supply. Never immerse the the appliance in water. 1 Check regularly (about once a month) that the inside of the appliance (accessible after removing the drip tray) is not dirty. 2 If necessary, remove coffee deposits with the brush supplied and a sponge. Remove all the residues with a vacuum cleaner.
CLEANING Cleaning the infuser The infuser must be cleaned at least once a month. IMPORTANT! The infuser must not be removed when the appliance is on. Do not use force to remove the infuser. 1 Make sure the machine is correctly turned off (see Turning off). 2 Open the service door. 3 Remove the drip tray and waste coffee container. 4 Press the two coloured release buttons inwards and at the same time pull the infuser outwards.
CLEANING Cleaning the milk container Lid with milk frother Frothed milk spout (adjustable) Frothed milk intake tube Froth adjustment and clean dial Lid release buttons Milk container Thermal casing Each time the milk container needs to be re-filled, clean it as described below: 1 Lift and remove the lid. 2 Extract the milk container from the thermal casing, holding it by the two side grips. IMPORTANT! The thermal casing must not be filled with or immersed in water. Clean with a damp cloth only.
CLEANING 6 Rinse inside the froth adjustment dial seat and the milk frother connector hole. 7 Check that the intake tube and spout are not clogged with milk residues. 8 Reposition the dial (lining up the arrow with the word INSERT). Reinsert the spout and milk intake tube. 9 Place the milk container in the thermal casing. !0 Place the lid back on the milk container.
DESCALE IMPORTANT! ● ● Read the instructions and the labelling on the descaler pack. Only use descaler authorised by the manufacturer. Using unsuitable descaler and/or performing descaling incorrectly may result in faults not covered by the manufacturer’s guarantee. Descale the appliance when DESCALING NEEDED PRESS OK TO START (~45min) appears on the display. To descale immediately, press and follow the instructions from point four. To descale the appliance later, press BACK.
DESCALE IMPORTANT! Hot water containing chemicals flows out of the spout. Take care to avoid contact with splashes of this solution. 8 Press to confirm that you have added the descaling solution. DESCALING UNDERWAY, PLEASE WAIT appears on the display. The descale programme starts and the descaler liquid comes out of the steam and coffee spouts. A series of rinses and pauses is performed automatically to remove all the scale residues inside the coffee maker.
DESCALE !5 INSERT WATER TANK: Place the water tank back in the appliance. !6 POSITION 2L CONTAINER OK TO START RINSING: Place the container used to collect the descaler solution empty under the hot water/steam spout and press . !7 Hot water is delivered from the steam spout and RINSING UNDERWAY is displayed. !8 EMPTY DRIP TRAY: At the end of rinsing, remove, empty and replace the drip tray and grounds container. Press NEXT. !9 DESCALE COMPLETE: press .
WATER SOFTENER FILTER Certain models are fitted with a water softener filter. If this is not the case with your model, you are recommended to purchase one from an approved supplier. To use the filter correctly, follow the instructions below. 1 2 3 4 5 Installing the filter Remove the filter from the packaging. Press . Press or until WATER FILTER appears on the display. Press . TURN DATE INDICATOR TO DISPLAY NEXT 2 MONTHS: turn the date indicator disk until the next two months of the year are displayed.
WATER SOFTENER FILTER Replacing the filter Replace the filter when REPLACE WATER SOFTENER FILTER, PRESS OK TO START appears on the display: to replace immediately, press and follow the instructions from point four. To replace the filter later, press BACK. The symbol appears on the display to remind you that the filter needs replacing. 1 2 3 4 5 6 7 8 Remove the tank and exhausted filter. Remove the new filter from the packaging. Press . Press or until WATER FILTER appears on the display. Press .
DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE WHAT TO DO Insufficient water in the tank. Fill the tank with water and ensure that it is inserted correctly, pushing it as far as it will go until it clicks into place. The tank is not correctly in place. Insert the tank correctly and press as far as it will go. The grounds container is full. Empty the grounds container and drip tray, clean and place it back in the appliance.
DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE WHAT TO DO A long coffee with pre-ground coffee has been requested. Place pre-ground coffee in the to continue funnel and press and complete delivery. The coffee beans have run out. Fill the beans container. The grinding is too fine and the coffee is delivered too slowly or not at all. Repeat coffee delivery and turn the grinding adjustment dial one click clockwise towards ‘7’ while the coffee mill is in operation.
DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE WHAT TO DO The hot water spout is not inserted or is not inserted correctly. Insert the water spout as far as it will go. The milk container is not inserted correctly. Insert the milk container as far as it will go. The infuser has not been replaced after cleaning. Insert the infuser as described in section ‘Cleaning the infuser’. The water circuit is empty. to deliver water from the Press spout until it flows out normally.
DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE WHAT TO DO The milk container has been inserted with the froth adjustment dial in the CLEAN position. To proceed with the CLEAN function, press or turn the froth adjustment dial to one of the milk positions. Milk has been delivered recently and the tubes inside the milk container must be cleaned. Turn the froth adjustment dial to CLEAN. The milk container has been inserted with the froth adjustment dial in the CLEAN position.
DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE WHAT TO DO The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly, as described in section ‘Cleaning’. If the message is still displayed after cleaning, contact Customer Care. The appliance needs descaling and/or the filter must be replaced. The descaling procedure described in the ‘Descale’ section, needs to be performed and/or the filter needs replacing or removing as described in section ‘Water softener filter’.
TROUBLESHOOTING If the problem cannot be resolved as described, contact Customer Care. PROBLEM POSSIBLE CAUSE WHAT TO DO The coffee is not hot The cups were not preheated. Warm the cups by rinsing them with hot water (Note: you can use the hot water function). The infuser has cooled down because two to three minutes have elapsed since the last coffee was made. Before making the coffee, heat the infuser by rinsing using the rinse function (see section ‘Rinsing’). A low coffee temperature is set.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE The appliance does not turn on It is not plugged into the mains socket. WHAT TO DO Plug into the mains socket. The main switch is not turned on. Press the main switch. The infuser cannot be extracted The appliance has not been turned off correctly. Turn the appliance off by pressing the AUTO OFF button (see section ‘Turning the appliance off’).
WARRANTY AND SERVICE Before you call for service or assistance... Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: 1 Your product is correctly installed. 2 You are familiar with its normal operation. If after checking these points you still need assistance or parts, please refer to the Service & Warranty book for warranty details and your nearest Authorised Service Centre, Customer Care, or contact us through our website fisherpaykel.com.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The product specifications in this document apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available. NZ AU GB IE 591553B 02.
