User Guide

90002422 Date: 7 April 2022 The models shown in this Preliminary Specification Guide (PSG) may not be available in all markets and are subject to change at any time. Product specifications may vary
from those shown. This PSG is superseded and will become obsolete upon launch of the product. This PSG should not be used as installation guidance for any product. Further information is required to
safely and correctly install the products featured here. Specific installation guidance will be available with the product on delivery and on our website fisherpaykel.com
PRELIMINARY SPECIFICATION GUIDE BUILT-IN COFFEE MAKER, 24"
SPECIFICATIONS
Model No.
EB24DSX1
(Optional 30" Trim Kit TK7630NDX1)
Dimensions H 18" (458mm) x W 2 7/16" (596mm) x
D 18 17/8" (480mm)
Total water tank capacity 17 fl oz (2.4L)
Weight 29kg (unpackaged)
9kg (packaged)
Electrical
Supply 120V, 50/60Hz
Service 10A circuit
C
B
A
A
C
B
D
PRODUCT DIMENSIONS
in mm
A
Overall height of coee maker 18” 458
B
Overall width of coee maker 2 7/16” 596
C
Depth of coee maker front and
control panel
1/16” 20
D
Depth of coee maker chassis 18 1/8” 460
E
Height of optional trim 18 1/16” 478
F
Width of optional trim 29 1/16” 757
G
Depth of optional trim front 1 5/8” 42
CAVITY DIMENSIONS
in mm
A
Height of cavity 17 /4” 450
B
Minimum inside width of cavity 22 1/16” 560
C
Minimum inside depth of cavity 21 7/16” 545
D
Height of cavity with trim 18 7/8” 480
E
Minimum inside width of cavity
with trim
22 1/16” 560
F
Width needed to include trim
within cabinetry
29 15/16” 761
G
Minimum inside depth of cavity
with trim – proud install
Minimum inside depth of cavity
with trim – flush install
22 1/16”
2 5/8”
560
600
Note: Ventilation required at the rear of the cavity.
ISO VIEW ISO VIEW ISO VIEW – WITH TRIM
e
f
g
Optional Trim Kit
e
f
g
D