User Guide

10
EN
Cleaning and maintenance
IMPORTANT!
Disconnect the power before cleaning or servicing.
Cleaning
Clean the external part with a mild, liquid detergent and avoid the use of abrasive

cleaning products.
Changing the light
1 Before changing the light make sure that the hood is not operating.
2 Remove the grease filter.
3 Replace the light with a light bulb no more powerful than that specified in the Technical
Characteristics.
4 Place the grease filter back into position.
IMPORTANT!
If the halogen lamps need replacing, they must be replaced by lamps with an aluminium
reflector, never dichroic lamps, to avoid unnecessary overheating in the lamp holders.
Cleaning the grease filter
Depending on use, and at least once a month, the grease

filters should be disassembled (Fig.5) and cleaned in
a dishwasher or with hot soapy water. If washed in a
dishwasher they should be placed in an upright position
to prevent food remains from falling on them.
After rinsing and drying, replace the filters by following

the steps for disassembly in reverse order.
Fig.5 Grease filters