Installation Guide and User Guide

21
INSTALLATION INSTRUCTIONS
Internal blower installation (HCB30/36/48 range hood models only)
The internal blower can be mounted as shown below.
1
From the inside of the range hood, loosen the 1/2” (12.7mm) screws securing the blower
plate to the range hood.
2
Slide the blower plate towards you and lower it out of the range hood.
3
Attach the blower plate to the blower using the 3/4” (19mm) screws provided.
4
Lift the blower into the range hood, fit the rear of
the blower plate onto the mounting bracket.
5
Lift the front of blower upwards until the screws
enter the keyhole slots on the blower plate.
6
Push the blower away from you (to the rear of the
range hood) and tighten the 1/2” (12.7mm) screws
to secure the blower to the range hood.
Inline blower connection (HC36 and HC48 range hood models only)
For inline blower installation see the instructions supplied with the inline blower unit.
Blower without plate attached Blower with plate attached
Front
Rear
EN