Installation Instructions and User Guide

17
CLEANING AND MAINTENANCE
EN
WARNING!

Unplug or disconnect the appliance from the power supply before servicing
orcleaning.

When replacing the bulb, let the bulb cool, and assure that power to the ventilation
hood has been turned off. Use new bulbs according to that indicated on the
ventilation hood nameplate.
IMPORTANT!

Never use abrasive or oil based cleaners

Wear gloves to protect against sharp edges
Maintenance
The ventilation hood should be cleaned regularly
using a mild, liquid detergent and a clean soft cloth
to avoid a build-up of grease occurring. Avoid
the use of corrosive chemicals, abrasive cleaning
products, hard brushes and steel wool pads. Grease
deposits are corrosive which can cause damage to
your ventilation hood.
Note: in areas of high humidity or coastal
environments, cleaning should be carried out more
frequently.
Aluminium filters

Depending on use, and at least once a month, the aluminium grease filters should be
removed and cleaned with hot soapy water or in a dishwasher.

If washed in a dishwasher, the filters should be placed in an upright position to prevent
food from falling on them.

After rinsing and drying, replace the filters.
Note: some discoloration of the frames may occur.
Removing the aluminium filters:
1
Open the stainless steel panel.
2
Pull the relative filter catch, tilting it downwards until it disengages from the supports.
3
Reverse these instructions when refitting the filters.