Installation Guide

7
PRIOR TO INSTALLATION
Fisher & Paykel is not liable for any damage caused by not following these instructions.
z
Please read the instructions carefully.
z
Unpack the rangehood.
z
Ensure the voltage (V) and the frequency (Hz) indicated on the rating plate match
thevoltage and frequency of the installation site.
z
Check all functions are working.
z
The rangehood surfaces can be damaged during installation if grazed or knocked
bytools. Please take care to protect the surfaces during installation.
z
Protect the cooktop surface with cardboard, or the like, to prevent damage
occurringwhilst the rangehood is being installed above.
z
The cabinet used for mounting the rangehood should have sufficient strength.
z
A power outlet should be within 750mm of the rangehood and can either be on the wall
or in the ceiling.