Installation Guide

3
COMPONENTS REQUIRED
z
Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
contact the dealer or retailer you bought the product from to report the damage.
z
Fisher & Paykel is not responsible for shipping damage.
External Blower (1) Back draft damper
assembly (1)
Roof seal kit
150mm Internal diameter
500mm PVC roof pipe (1)
Technical content (1)
Aluminium tape
(DO NOT use duct tape)
200mm diameter Flexible
ducting 6m (1)
12mm Plastic self-tapping
screws (4)
Support straps/brackets
for PVC roof pipe
150 – 200mm Duct
connection adapter (1)
12mm Sheet metal screws
(4)
Zip ties and sealant
Supplied
Not supplied
Your external blower must be installed with a compatible rangehood. Refer to the range
hood installation guide. A list of external blower compatible rangehoods can be found at
fisherpaykel.com.
HB1200E Models
RANGEHOOD EXTERNAL BLOWER
INSTALLATION GUIDE
NZ AU
PARTS COMPATIBLE RANGEHOODS