INSTALLATION INSTRUCTIONS USER GUIDE Built-In Integrated Rangehood HP60IDCHX2, HP90IDCHX2, HP60IDCHX3 and HP90IDCHX3 models NZ AU ROW
CONTENTS Introduction 3 Safety and warnings 4 Installation instructions 7 Operating instructions 15 Cleaning and maintenance 16 Parts and accessories 18 Manufacturer’s Warranty 19 Customer Care 21 IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website www.fisherpaykel.
INTRODUCTION Thank you for purchasing a Fisher & Paykel product. Thousands of hours go into the design, engineering, testing and perfecting of each Fisher & Paykel appliance. The care and attention given to creating these beautiful products doesn’t stop once it has found its home with you.
SAFETY AND WARNINGS ! 8.2 kg WARNING! Weight Hazard The appliance is heavy. Please ensure adequate care is taken when installing the appliance to prevent personal injury. The appliance must be installed onto a solid wall, stud, beam or truss. Weight of the product is 8.2 kg (HP60) / 11.5 kg (HP90). (HP60) 11.5 kg (HP90) ! WARNING! Electric Shock Hazard Always disconnect the appliance from the mains power supply before carrying out any maintenance or repairs.
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTIONS WARNING! When using this appliance always exercise basic safety precautions including the following: ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● Please read the entire set of instructions before installing or using this appliance. Please make this information available to the person installing the appliance – doing so could reduce your installation costs.
SAFETY AND WARNINGS ●● ●● ●● ●● ●● ●● ●● ●● 6 You must read the details concerning the method and frequency of cleaning. There is a fire risk if cleaning is not carried out in accordance with the instructions. Never leave frying food unattended since grease can overheat and catch fire. The risk of fire is even greater in the case of used oil. Do not flambé under the rangehood. Never use the rangehood without the filters in place.
INSTALLATION INSTRUCTIONS Contents of packaging INSTALLATION INSTRUCTIONS USER GUIDE Built-In Integrated Rangehood HP60IDCHX2, HP90IDCHX2, HP60IHCB3 and HP90IHCB3 models NZ AU ROW Rangehood (1) 125 mm ducting adapter (1) Installation instructions User guide manual (1) 150 mm ducting adapter with non return flap (1) 13 mm screw (2) 7
INSTALLATION INSTRUCTIONS Product and cabinetry cutout dimensions K J Ø L Power cord location H Ducting adapter I (A) A D G O F C E B M N N M HP60 8 HP90
INSTALLATION INSTRUCTIONS PRODUCT DIMENSIONS HP60 HP90 mm mm 350 (395) 315 (360) B Overall width of product 530 830 C Overall depth of product 280 280 2 2 E Width of chassis 492 792 F Depth of chassis 255 255 120 120 H Width of top surface of chassis 220 220 I Length of angled surface of chassis 260 335 J Distance from centre of ducting outlet 145 145 K Distance from centre of ducting outlet 245 395 L Diameter of ducting outlet 150 150 M Distance between centre of ligh
INSTALLATION INSTRUCTIONS Height of rangehood P MINIMUM CLEARANCES P Height top of cooktop to base of product Electric cooktop Gas cooktop mm min. 600 – max. 750 min. 650 – max. 750 Rangehood installation height above the cooktop is the user’s preference. Lower installation heights will improve the efficiency of capturing cooking odours, grease, and smoke. This rangehood must be installed between the minimum and maximum dimensions indicated in the table above.
INSTALLATION INSTRUCTIONS Venting options Attention should be given to ensure that any applicable regulations concerning the discharge of exhaust air are fulfilled. The rangehood can be installed to operate with the exhaust air ducted externally from the kitchen, or installed to operate with the exhaust air recirculating within the kitchen. Ducted For ducted installation it is recommended that 150 mm diameter, rigid or semi-rigid ducting is used.
INSTALLATION INSTRUCTIONS WARNING! ●● ●● ●● This appliance is heavy and requires two persons for unpacking and installation Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards. Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards IMPORTANT! Wear gloves to protect against sharp edges.
INSTALLATION INSTRUCTIONS 4 Remove the filters and face plate of the rangehood.
depth INSTALLATION INSTRUCTIONS 5 Connect duct and plug rangehood in. 2.3 2.1 2.2 6 Lift the rangehood and fit through the opening of the cupboard till the spring loaded brackets / clips hold the product in place. x4 7 Secure rangehood while tightening the 4 brackets / clips.
OPERATING INSTRUCTIONS Touch control panel CONTROL PANEL FEATURES Filter cleaning alert Activated regularly to alert of the need to clean filters. It can be deactivated with a single press. Timer Turn the timer on. The fan operates for 5 minutes at the current speed and each descending speed before turning off. Lights Turn the lights on or off. The lights turn on to the last level selected. Press and hold to adjust the level of light. Power on/off Turn the rangehood on or off.
CLEANING AND MAINTENANCE WARNING! ●● ●● Unplug or disconnect the appliance from the power supply before servicing or cleaning. When replacing the bulb, let the bulb cool, and assure that power to the rangehood has been turned off. Use new bulbs according to that indicated on the rangehood nameplate.
CLEANING AND MAINTENANCE Light bulb replacement Note: replacement bulbs are not covered by warranty. 1 2 3 4 5 6 Open the glass panel. Remove the aluminium filters. Unscrew the light bulb. Insert the replacement bulb into the lamp socket. Replace the aluminium filters. Replace the glass panel.
PARTS AND ACCESSORIES 18 ITEM REFERENCE NUMBER LED bulb x2 792393 Aluminium filter 792429 Recirculation carbon filter x2 792481 Ducting 150 mm kit (eaves) PD-RHK150E Ducting 150 mm kit (wall) PD-RHK150W
MANUFACTURER’S WARRANTY You automatically receive a 2 year Manufacturer’s Warranty with the purchase of this Built-In Integrated Rangehood covering parts and labour for servicing within the country of purchase. Fisher & Paykel undertakes to: Repair or, at its option, replace without cost to the owner either for material or labour any part of the product, the serial number of which appears on the product, which is found to be defective within TWO YEARS of the date of purchase.
MANUFACTURER’S WARRANTY For Australian Customers This Manufacturer’s Warranty is an extra benefit and does not affect your legal rights. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
CUSTOMER CARE Before you call for service or assistance... Check the things you can do yourself. Refer to your user guide and check that: 1 Your product is correctly installed. 2 You are familiar with its normal operation. If after checking these points you still need assistance or parts, please refer to your nearest Fisher & Paykel trained and supported service technician, Customer Care, or contact us through our local website listed on the back cover.
CUSTOMER CARE *If you call, write or contact our website please provide: your name and address, model number, serial number, date of purchase and a complete description of the problem. This information is needed in order to better respond to your request for assistance. Product details can be found on the inside of the chassis. The filter needs to be removed to be able to see them. Registration Register your product with us so we can provide you with the best service possible.
www.fisherpaykel.com © Fisher & Paykel Appliances 2015. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your dealer to ensure this booklet correctly describes the product currently available. NZ AU ROW 104077 B 12.
