BUILT-IN INTEGRATED RANGEHOOD HP60IDCHX3 & HP90IDCHX3 models INSTALLATION GUIDE / USER GUIDE NZ AU
CONTENTS Introduction 3 Safety and warnings 4 Installation instructions 7 Operating instructions 15 Cleaning and maintenance 17 Parts and accessories 19 Service and warranty 20 IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, go to our website fisherpaykel.com or contact your local Fisher & Paykel dealer.
INTRODUCTION Welcome to the family of Fisher & Paykel appliances. Our team has spent thousands of hours designing, engineering and testing this Integrated Rangehood to ensure you get the perfect product for your home. For more information on your product please visit fisherpaykel.com or contact our Customer Care team.
SAFETY AND WARNINGS ! 8.2 kg (HP60) WARNING! Weight Hazard The appliance is heavy. Please ensure adequate care is taken when installing the appliance to prevent personal injury. The appliance must be installed onto a solid wall, stud, beam or truss. Weight of the product is 8.2 kg (HP60) / 11.5 kg (HP90). 11.5 kg (HP90) ! WARNING! Electric Shock Hazard Always disconnect the appliance from the mains power supply before carrying out any maintenance or repairs.
SAFETY AND WARNINGS IMPORTANT SAFETY INFORMATION READ THE ENTIRE SET OF INSTRUCTIONS BEFORE INSTALLING OR USING THIS APPLIANCE. A copy of the user guide and installation guide for this product can also be found at fisherpaykel.com. WARNING! When using this appliance always exercise basic safety precautions including the following: zz zz zz zz zz zz zz zz zz zz zz zz zz zz zz Read the entire set of instructions before installing or using this appliance.
SAFETY AND WARNINGS zz zz zz zz zz zz zz zz zz zz 6 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
INSTALLATION INSTRUCTIONS Contents of packaging BUILT-IN INTEGRATED RANGEHOOD HP60IDCHX2, HP90IDCHX2, HP60IDCHX3 & HP90IDCHX3 models INSTALLATION GUIDE / USER GUIDE NZ AU ROW Rangehood (1) 125 mm ducting adapter (1) Installation instructions User guide manual (1) 150 mm ducting adapter with non return flap (1) 13 mm screw (2) 7
INSTALLATION INSTRUCTIONS Product and cabinetry cutout dimensions K J Ø L Power cord location H Ducting adapter I (A) A D F C HP60 8 G m E B HP90
INSTALLATION INSTRUCTIONS HP60 HP90 mm mm A Overall height of product 316 (361) 316 (361) B Overall width of product 530 830 C Overall depth of product 280 280 2 2 E Width of chassis 492 792 F Depth of chassis 255 255 G Height of side of chassis 120 120 H Width of top surface of chassis 220 220 I Length of angled surface of chassis 260 335 J Distance from centre of ducting outlet 145 145 K Distance from centre of ducting outlet 245 395 L Diameter of ducting outlet 150 1
INSTALLATION INSTRUCTIONS Height of rangehood P MINIMUM CLEARANCES P Height top of cooktop to base of product Electric cooktop Gas cooktop mm min. 600 – max. 750 min. 650 – max. 750 Rangehood installation height above the cooktop is the user’s preference. Lower installation heights will improve the efficiency of capturing cooking odours, grease, and smoke. This rangehood must be installed between the minimum and maximum dimensions indicated in the table above.
INSTALLATION INSTRUCTIONS Venting requirements IMPORTANT! To reduce risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces, or garages. The range hood can be installed to operate with the exhaust air ducted externally from the kitchen or with the exhaust air recirculating within the kitchen. External venting zz zz For best results: Use the shortest and straightest duct route possible.
INSTALLATION INSTRUCTIONS IMPORTANT! Venting directly into the cabinet with no ducting and louvered vent is not permitted. To recirculate your perimeter insert range hood: 1 Determine the desired location of the 150mm louvered vent on your cabinetry. The louvered vent can be placed on the side or front of your cabinet provided there is sufficient clearance from the surrounding cabinetry to enable ventilated air to recirculate back into your kitchen.
INSTALLATION INSTRUCTIONS 1 3 2 4 360˚ 360˚ 360˚ 360˚ 360˚ 360˚ 5 6 13
INSTALLATION INSTRUCTIONS 5 Lift the rangehood and fit through the opening of the cupboard till the x4 spring loaded brackets / clips hold the product in place. x4 2.3 2.1 width 2.2 depth 6 Secure rangehood while tightening the 4 brackets / clips. 7 Connect duct and plug rangehood in.
OPERATING INSTRUCTIONS This rangehood should be turned on for a few minutes before cooking in order to establish air currents upward through the rangehood. This will also enable hot air removal from your kitchen and keep the rangehood surface cool. When heat, smoke, moisture, grease and cooking odours are produced, they will be carried outside instead of drifting into other rooms. Use the low fan speeds for normal use and the higher fan speeds for high heat, strong odours or fumes.
OPERATING INSTRUCTIONS Touch control panel CONTROL PANEL FEATURES Filter cleaning alert Activated regularly to alert of the need to clean filters. It can be deactivated with a single press. Timer Turn the timer on. The fan operates for 5 minutes at the current speed and each descending speed before turning off. Turn the lights on or off. The lights are dimmable. Lights Power on/off Fan speed 1 – 3 Boost 16 Press and hold to progressively adjust the brightness level. Turn the rangehood on or off.
CLEANING AND MAINTENANCE WARNING! zz zz zz Before servicing or cleaning your rangehood, switch the power off at the control panel and disconnect the power to prevent power from being switched on accidentally. Allow the appliance to cool after the power has been turned off before servicing. There is a risk of fire if cleaning is not carried out in accordance with these instructions. IMPORTANT! zz zz Never use abrasive or oil based cleaners. Wear gloves to protect against sharp edges.
CLEANING AND MAINTENANCE Removing the aluminium filters: 1 Open the glass panel. 2 Pull the relative filter catch, tilting it downwards until it disengages from the supports. 3 Reverse these instructions when refitting the filters. Note: Do NOT operate the rangehood without the filters in place. The filters help prevent damage to the inside of the rangehood.
PARTS AND ACCESSORIES ITEM REFERENCE NUMBER Aluminium filters FILTER METALLIC GTCL 60 792942 FILTER METALLIC GTCL 90 792943 Recirculation carbon filter x2 Ducting 150 mm kit (eaves) Ducting 150 mm kit (wall) 792481 PD-RHK150E PD-RHK150W 19
SERVICE AND WARRANTY For details of your manufacturer’s warranty and contacts for servicing, please refer to your separate service and warranty book provided with your rangehood. Complete and keep for safe reference: Model Serial No.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2019. All rights reserved. The product specifications in this document apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this document correctly describes the product currently available. NZ AU ROW 105938A 11.
