Installation Instruction

3
EN
3PRODUCT AND CABINETRY CUT-OUT DIMENSIONS
IMPORTANT!

Actual product dimensions may vary by ± 1/16”(2mm).

Please read the entire instructions before installing the range hood.
HPB3011-4
HPB3011-6 HPB3019-6
HPB3611-4
HPB3611-6 HPB3619-6 HPB3619-12 HPB4819-12
PRODUCT DIMENSIONS inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) inches (mm)
A
Overall height of product 16 1/4 (412) 16 1/4 (412) 16 1/4 (412) 16 1/4 (412) 183/16 (462) 183/16 (462)
B
Overall height of product (excluding duct adaptor) 16 (407) 16 (407) 16 (407) 16 (407) 16 (407) 16 (407)
C
Overall width of product 283/4 (730) 283/4 (730) 345/8 (880) 345/8 (880) 345/8 (880) 467/16 (1180)
D
Overall depth of product 11 (280) 187/8 (480) 11 (280) 187/8 (480) 187/8 (480) 187/8 (480)
E
Thickness of flange 1/16 (2.5) 1/16 (2.5) 1/16 (2.5) 1/16 (2.5) 1/16 (2.5) 1/16 (2.5)
F
Corner radius of flange 1/8 (3.5) 1/8 (3.5) 1/8 (3.5) 1/8 (3.5) 1/8 (3.5) 1/8 (3.5)
G
Width of chassis including louvres 279/16 (700) 279/16 (700) 337/16 (850) 337/16 (850) 337/16 (850) 451/4 (1150)
H
Depth of chasis including mounting feet 103/8 (264) 181/4 (463) 103/8 (264) 181/4 (463) 181/4 (463) 181/4 (463)
I
Depth of chassis excluding mounting feet 915/16 (252) 1713/16 (452) 915/16 (252) 1713/16 (452) 1713/16 (452) 1713/16 (452)
J
Height of side of chassis 43/8 (111) 43/8 (111) 43/8 (111) 43/8 (111) 43/8 (111) 43/8 (111)
K
Width of blower housing 13 (330) 13 (330) 13 (330) 13 (330) 231/4 (590) 231/4 (590)
L
Offset of duct adaptor — forward of center 3/8 (10) 7/8 (23) 3/8 (10)) 7/8 (23) 0 (0) 0 (0)
M
Outside diameter of ducting outlet 81/4 (210) 81/4 (210) 81/4 (210) 81/4 (210) 913/16 (250) 913/16 (250)
N
Width of duct adaptor N/A N/A N/A N/A 123/16 (310) 123/16 (310)
O
Depth of duct adaptor N/A N/A N/A N/A 121/2 (318) 121/2 (318)
P
Distance from center of light to front of product 13/8 (35.5) 13/8 (35.5) 13/8 (35.5) 13/8 (35.5) 13/8 (35.5) 13/8 (35.5)
Q
Height to top surface of duct adaptor N/A N/A N/A N/A 167/8 (428) 167/8 (428)
R
Offset of junction box knockout from center 75/16 (186) 75/16 (186) 75/16 (186) 75/16 (186) 127/16 (316) 127/16 (316)
S
Offset of junction box knockout from center 35/8 (92) 79/16 (192) 35/8 (92) 79/16 (192) 79/16 (192) 79/16 (192)
CABINETRY CUT-OUT DIMENSIONS
U
Overall width of cutout
273/4 (705) 273/4 (705) 3311/16 (855) 3311/16 (855) 3311/16 (855) 451/2 (1155)
V
Overall depth of cutout
101/16 (255) 1715/16 (455) 101/16 (255) 1715/16 (455) 1715/16 (455) 1715/16 (455)
Thickness of cabinetry surface Min 5/8 (16)
Max 1 1/2 (38)
Min 5/8 (16)
Max 1 9/16 (38)
Min 5/8 (16)
Max 1 1/2 (38)
Min 5/8 (16)
Max 1 1/2 (38)
Min 5/8 (16)
Max 1 1/2 (38)
Min 5/8 (16)
Max 1 1/2 (38)
Note:
For the larger models we recommend reinforcing your cabinetry. Please ensure that any reinforcing does not prevent access for servicing.
For optional recessed installation refer to product dimensions for reference.