Manualshelf

Data Sheet Insert Rangehood

ManualsBrandsFisher & Paykel ManualsCookingHPB361912N Fisher & Paykel 36" Series 9 Integrated Insert Range Hood with 1100 CFM - Stainless Steel
12
DATA SHEET
Integrated Rangehood
DATE: 18.05.2021
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
POWERCORD LOCATION
POWERCORD LOCATION
LED STRIP : COLOR TEMPERATURE 3000K
Model no:
HPB3619-12
(refer page 2 for metric measurements)
Product Dimensions
inches
a Overall height of rangehood including duct adapter
18 /16
B Overall width of rangehood
4 5/8
c Overall depth of rangehood
18 7/8
d Thickness of flange
/2
E Corner radius of flange
1/8
f Overall height of chassis excluding duct adapter
15
g Height of chassis at side
4 1/4
h Overall width of chassis
 1/2
i Width of chassis blower housing
2 1/4
j Depth of chassis including mounting brackets
18 /16
k Depth of chassis excluding mounting brackets
17 1/16
l Height from top of flange to horizontal surface of duct adapter
16 1/16
m Width of duct adapter
12 /4
n Depth of duct adapter
12 /4
o Outside diameter of duct adapter
9 1/16
p Offset of duct adapter forward from centre
0
q Distance from front of flange to LED strip
1/16
r Depth of LED strip
1 1/4
s Width from centreline to powercord
12 7/16
t Depth from centreline to powercord
7 5/8
Cutout Dimensions
inches
Width of cutout (centred to product)
 11/16
Depth of cutout (centred to product)
17 15/16
Thickness of cabinetry surface
5/8 - 1 1/2
Height from base of product to cooking surface
inches
Minimum - refer to cooktop/range specifications
Maximum recommended
42
Electrical Requirements
Supply
120V 60Hz
Service
15 amp circuit
LED color temperature
000K
Unit Weight
68lb
18 7/8"
DATUM :
TOP OF FLANGE
C
o
m
h
r
k
FRONT VIEW
PLAN VIEW
PROFILE VIEW
n
t
g
A
s
D
B
4 5/8"
j
i
INDICATES PRODUCT DATUM -------------------------------------------
CUTOUT DIMENSIONS -----------------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
BOTTOM VIEW
E
Cabinet Base Thickness
MAX 38mm
MIN 16mm
q
18 3/16"
f
p
l

Summary of content (2 pages)